|
Show your rotary car build up. Show off your Rotary Car build! |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Rotary Fanatic
Join Date: Feb 2011
Posts: 210
Rep Power: 15 ![]() |
Yesterday I continued with my Peripheral-inserts.
Because they are threaded into the housings there is imported to get the D-shape in the right angle to align with the pre-machined D-shape in the housings. The D-shape closest to the housing are bigger than the round hole and the runners, so therefore I need to machine this with the inserts on the side. I could have done a round hole in the center, and port the sleeves by hand. But I'm really not a "handyman" ![]() It worked out pretty well! I was really nervous when I mounted the first insert... I very satisfied. Next is to deside how to couple the inserts with the runners, and also how my runners will look like, size and lenght. Butterfly-throttles or slides. ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2 | |
⊙⊙
Join Date: Dec 2009
Location: Great Falls
Posts: 1,258
Rep Power: 17 ![]() |
Rotar Cave!
__________________
Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|