my 93 SSM FD build

Brent · 03-02-2008, 05:54 PM

Found it!! Now it is idling right around 1100rpm's. I had a spot on the corner of my UIM where it meets the UIM to LIM gasket that wasn't quite sealing. I grinded it down flat and put a new gasket on just for good measure... and that sealed it right off. Thanks to Dan Chadwick for all the pointers.

Also, now that the idle has come down, I haven't had any glowing manifold issues.

Here are a few pictures... still looking pretty rough, but I'm about to put the rest of the trim back on. The taillights go on tomorrow as soon as my fedex package gets here that has the brackets in it. Front lip and undertray go on tomorrow.

Yes, I know... I really need to put the lip on:

__________________

03-02-2008, 05:54 PM	#1
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	Found it!! Now it is idling right around 1100rpm's. I had a spot on the corner of my UIM where it meets the UIM to LIM gasket that wasn't quite sealing. I grinded it down flat and put a new gasket on just for good measure... and that sealed it right off. Thanks to Dan Chadwick for all the pointers. Also, now that the idle has come down, I haven't had any glowing manifold issues. Here are a few pictures... still looking pretty rough, but I'm about to put the rest of the trim back on. The taillights go on tomorrow as soon as my fedex package gets here that has the brackets in it. Front lip and undertray go on tomorrow. Yes, I know... I really need to put the lip on: __________________ __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM