My fd project

David Jerome · 06-14-2008, 10:34 PM

On the exhaust port, it looks like you only opened it just a touch earlier than factory? Is this correct, am I seeing the picture correctly. I am building my motor later in the week and since I am deciding to stay stock twins at the moment I am deciding to do extremely conservative porting for I usually do on the rebuilds I sell.

The template I use for standard porting is basically the same as Gotham's Large street port. I decided to keep the exhaust port very close to factory with just a few minor adjustments as I feel the factory Peripheral exhaust port should flow plenty for my goals.

Everything looks good.

06-14-2008, 10:34 PM	#5
David Jerome RCC Contributor Join Date: Jan 2008 Posts: 713 Rep Power: 18	On the exhaust port, it looks like you only opened it just a touch earlier than factory? Is this correct, am I seeing the picture correctly. I am building my motor later in the week and since I am deciding to stay stock twins at the moment I am deciding to do extremely conservative porting for I usually do on the rebuilds I sell. The template I use for standard porting is basically the same as Gotham's Large street port. I decided to keep the exhaust port very close to factory with just a few minor adjustments as I feel the factory Peripheral exhaust port should flow plenty for my goals. Everything looks good. __________________ David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work