Rice Racing M&W CDI COP Set-up

[Fendamonky]

Originally Posted by RICE RACING

Designed for racing spec purpose only
R7420 spark plugs and older platinum/platinum plugs versions.
I have not validated it but will check plug length of stock type plugs.

Other types of plugs (cheap shit versions) NO!
IF you run these then you are not the kind of person who would pay for my quality items anyway so it was never designed to suit that market.

Other aspects a few people are checking out RE: PS and AC etc

So these would work with the BUR#EQ(P) plugs then, correct?

[RICE RACING]

Originally Posted by Fendamonky

So these would work with the BUR#EQ(P) plugs then, correct?

From my memory they are the same dimension so yes, but will validate that this morning my time and post back.

[TitaniumTT]

Originally Posted by speedjunkie

I think this is the fastest I've ever seen anything be developed LOL. Well done, well done. I'm eager for people to measure for the PS and AC, and I might see if my buddy can measure between the engine and pump on my car. Or I might just get one regardless, knowing I can easily resell it if it doesn't fit my setup lol.

Just move the damn pump!

Originally Posted by Fendamonky

So these would work with the BUR#EQ(P) plugs then, correct?

Just run the 7420's dude.... the reason I generally rec AGAINST colder plugs is because the ign system isn't up to snuff to properly fire the plugs. Change to colder shitty 6750 I think???? and need to "retune" the car because the AFR's are all over the place, then as you're pulling fuel out you see the EGT's go up... fuck that noise......
These coils I don't see as having a problem.

[speedjunkie]

Originally Posted by TitaniumTT

Just move the damn pump!

But I don't wanna! lol I had the mounting bracket welded to the frame with the bolts sticking out, and I don't want to move the pump again and just leave all that exposed. If I could remove the bracket and make it look good like the stock frame again, I'd seriously think about it.