Your experience with various coilers

[Pete_89T2]

Originally Posted by RETed

Pete_89T2's pic looks like it has a smidgen too much camber in the rear, or it's a weird illusion of the pic due to the compression of the suspension due to the turn...

^I noticed that in the picture too, and wondered why it looked that way. I always assumed it's just the lateral-G loading combined with the wavy road surface crowning. The RB springs I have are supposed to lower the car about 3/4", but when I measured the difference (from subframe rails to my garage floor), the difference was only about 1/4" lower than with my stock springs & shocks. Granted, the stock springs were likely worn out and sagging when I replaced them.

[chibikougan]

Originally Posted by Pete_89T2

^I noticed that in the picture too, and wondered why it looked that way. I always assumed it's just the lateral-G loading combined with the wavy road surface crowning. The RB springs I have are supposed to lower the car about 3/4", but when I measured the difference (from subframe rails to my garage floor), the difference was only about 1/4" lower than with my stock springs & shocks. Granted, the stock springs were likely worn out and sagging when I replaced them.

Haha the dreaded worn out spension lift when replaced....