Fenda's uber garage Engine Build - Page 26

almoststockfc · 03-09-2015, 07:15 PM

K. . Looks good

Fendamonky · 03-09-2015, 07:18 PM

Quote:

Originally Posted by chibikougan

Did it come with Reeses Pieces ?

No.

chibikougan · 03-09-2015, 07:20 PM

Quote:

Originally Posted by Fendamonky

No.

Call him and complain...

GySgtFrank · 03-09-2015, 07:23 PM

Quote:

Originally Posted by Fendamonky

No.

needs more pubes methinks.

Fendamonky · 03-09-2015, 07:26 PM

Oh, there are plenty more to be added Gunny

***TitaniumTT*** · 03-09-2015, 11:05 PM

I like that breather... gonna have to try something like that when the engine comes out this weekend....

chibikougan · 03-10-2015, 02:44 AM

Quote:

Originally Posted by TitaniumTT

I like that breather... gonna have to try something like that when the engine comes out this weekend....

The RE not have a breather built into the Filler neck? Or do you guys have custom filler necks with no breathers?

Or just extra breathing?

Fendamonky · 03-10-2015, 05:51 AM

Quote:

Originally Posted by TitaniumTT

I like that breather... gonna have to try something like that when the engine comes out this weekend....

Yeah, it's part of afgmoto's catch can setup. It mounts to the same bolts that the engine stand is using, so I won't mount that until the motor is in the car.

Quote:

Originally Posted by chibikougan

The RE not have a breather built into the Filler neck? Or do you guys have custom filler necks with no breathers?

Or just extra breathing?

They do have a breather in the filler neck, its just an extra breather on the other side.

speedjunkie · 03-10-2015, 07:30 AM

I have that catch can by Adam too. I love it! I'm thinking about making another hardline to connect between the rear breather and the can though, just to clean it up a little.

***TitaniumTT*** · 03-10-2015, 08:26 AM

Quote:

Originally Posted by chibikougan

The RE not have a breather built into the Filler neck? Or do you guys have custom filler necks with no breathers?

Or just extra breathing?

Just extra breathing...

Fendamonky · 07-23-2016, 11:23 AM

Back from the grave... This is going to be a thing:

estevan62274 · 07-23-2016, 07:48 PM

Very nice!

I love my efr 8374

***TitaniumTT*** · 07-24-2016, 01:01 AM

speedjunkie · 07-24-2016, 10:40 PM

Quote:

Originally Posted by Fendamonky

Back from the grave... This is going to be a thing:

Nice! EFR are my favorite turbos now. The ONLY thing I may switch to at some point is the Magneti Marelli turbo they use in F1 lol.

Quote:

Originally Posted by estevan62274

Very nice!

I love my efr 8374

I just installed an IWG 8374 a few months ago and I like it, but to be honest I think I liked the EWG 7670 even more (aside from the extra BS of having external WG lol). It was an absolute MONSTER down low, starting spool around 2k and making power to about 7500. Although I haven't gotten it fully tuned on this turbo yet, so maybe I just haven't seen enough. Also, I could hear the 7670 spooling (like a jet engine) through a parking lot. I have to build a bit more boost on the street to hear this one.

Fendamonky · 07-25-2016, 04:26 AM

Quote:

Originally Posted by estevan62274

Very nice!

I love my efr 8374

Cheers. Yeah, I think I'll enjoy it for sure

Quote:

Originally Posted by TitaniumTT

Quote:

Originally Posted by speedjunkie

Nice! EFR are my favorite turbos now. The ONLY thing I may switch to at some point is the Magneti Marelli turbo they use in F1 lol.

I just installed an IWG 8374 a few months ago and I like it, but to be honest I think I liked the EWG 7670 even more (aside from the extra BS of having external WG lol). It was an absolute MONSTER down low, starting spool around 2k and making power to about 7500. Although I haven't gotten it fully tuned on this turbo yet, so maybe I just haven't seen enough. Also, I could hear the 7670 spooling (like a jet engine) through a parking lot. I have to build a bit more boost on the street to hear this one.

Hehe, yeah... I was torn between an 8374 and a 9174. I got a SCREAMING deal on the 91 though, and it will give a higher ceiling for power potential, so that's what I went with.

Just waiting for the paypal to clear, then Andy will kick the EFR my way

03-09-2015, 07:15 PM	#376
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN Posts: 543 Rep Power: 16	K. . Looks good __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP

03-09-2015, 11:05 PM	#381
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I like that breather... gonna have to try something like that when the engine comes out this weekend.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-23-2016, 07:48 PM	#387
estevan62274 counting down till DGRR Join Date: Mar 2008 Location: Melbourne, Fl Posts: 358 Rep Power: 18	Very nice! I love my efr 8374 __________________ -74 RX-4 -84 REW GSL-SE Past rides -05 REW Swapped RX-8 -93 FD base

07-24-2016, 01:01 AM	#388
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	__________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-10-2015, 07:30 AM	#384
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I have that catch can by Adam too. I love it! I'm thinking about making another hardline to connect between the rear breather and the can though, just to clean it up a little.