Norwegian S4 Base TII

Pettersen · 04-15-2015, 08:30 AM

Before i mounted the itb setup, i modified the exhaust somewhat, to get it to not make my ears bleed.

Improved the Y on the headers, wich was a heavy, ugly pos hack job, welded with the worst mag welder ever created, and replaced it with just a vband, also made and fitted a vband and compensator to a new muffler. I don't have pictures of the rear muffler, but it is a RB turbo muffler i got from a friend, and it is way better than anything i ever had before.

Some videos, before and after. No rear muffler on the befor vids, gave it to a friend who wanted it on his rx8.

Pettersen · 08-27-2015, 01:39 PM

Got the stock camber link, Toe rods, front swaybar link and rear sway bar link into the computer, considering making my own adjustable ones since it seems like it would be a fairly easy project, and much cheaper (and more fun) than buying the ones available.
I should be able to make all of the rod's for less than the cost of toe rods.

04-15-2015, 08:30 AM	#1
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Before i mounted the itb setup, i modified the exhaust somewhat, to get it to not make my ears bleed. Improved the Y on the headers, wich was a heavy, ugly pos hack job, welded with the worst mag welder ever created, and replaced it with just a vband, also made and fitted a vband and compensator to a new muffler. I don't have pictures of the rear muffler, but it is a RB turbo muffler i got from a friend, and it is way better than anything i ever had before. Some videos, before and after. No rear muffler on the befor vids, gave it to a friend who wanted it on his rx8.

08-27-2015, 01:39 PM	#2
Pettersen Rotary Fanatic Join Date: Mar 2010 Location: Norway Posts: 163 Rep Power: 16	Got the stock camber link, Toe rods, front swaybar link and rear sway bar link into the computer, considering making my own adjustable ones since it seems like it would be a fairly easy project, and much cheaper (and more fun) than buying the ones available. I should be able to make all of the rod's for less than the cost of toe rods.