|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
The Newbie
Join Date: Jul 2011
Location: Charlotte, North Cackalacky
Posts: 18
Rep Power: 0 ![]() |
Ok... Sorry its taken so long to get back to you, but I just now had time to f#@k with this.
The tank looked good and the "bowl" in the tank was clean and practically debris free. The sock looked good and also had very little debris. What do I do or test next? The pump is out and I'll be awaiting your reply. |
![]() |
![]() |
![]() |
#2 |
RCC Addict
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 19 ![]() |
Do you have something that can show you fuel pressure?
If so, there is a "dead end" pressure spec for the fuel pump (at full voltage). That's the easy one to check... Next, you'd need to be able to watch fuel pressure at the fuel rail, which will usually call for a "T". Run the gauge to the windshield and tape it there so that you can watch it while you're driving temporarily. If it is fuel (pressure), it's either going to be a drop if fuel pressure due to a mechanical failure, or an electrical one... -Ted |
![]() |
![]() |
![]() |
Bookmarks |
|
|