Dgrr 2016

***TitaniumTT*** · 03-21-2016, 09:41 AM

Except I don't have a running rotary. FrankenB isn't running yet and that takes priority over my FC..... I know this is a contradiction in terms, but there should be at least one decent FB there

RX8 - finally got the PS fixed over the weekend but the air filter is fucked, need a new one of those from Racing Beat because damn REVi,
I totally jewed every last cent out of the rear tires and corded both of them
I actually have to pull the engine and replace the front cover because the trigger sensor bolt stripped out and the heli-coil got fucked, so the sensor sits a little crooked and the trigger wheel doesn't line up with the center of the sensor, so it misfires horribly over 7k. Sometimes it's so bad it actually drops a rotor and floods half the engine. Oh, new brakes at both ends

FC - I conclusively found the issues with the fuel pumps and started rewiring all that shit over the weekend, waiting on some 12Ga tefzel to show up and then I can finish that. Also needs hardlines on the WG's, repack the front bearings, remount the oil coolers, reduct the brakes, make sure there's still some life left in the brakes, replace the Aquamist pump head, replumb some of the AI lines, add a pre-turbo nozzle, dyno the thing, and replace the rear tires in that as I blew them off enough that they're bald in the center.

With Frankenb not even started, not having a completed suspension front or rear, and all the other little bullshit things that need to be done with that fucker, yeah, that takes priority.

Plus I don't feel like killing myself on that car AGAIN especially with working 50-60 hours a week..... just don't have the desire. I'd like to enjoy myself so the FC will be sitting it out this year. Fuck it....

And, it's a heated ball massager.

almoststockfc · 03-21-2016, 10:27 AM

Quote:

Originally Posted by TitaniumTT

add a pre-turbo nozzle,

Add? Are you going to keep your other along with the pre turbo? or replace

reddozen · 03-21-2016, 05:00 PM

Quote:

Originally Posted by TitaniumTT

RX8 - finally got the PS fixed over the weekend ...

Now if I could just get mine to stop dropping intermittently. I'll be pulling the harness... again....

New PS computer, 3rd rack, 2nd harness... just going to have to comb over every inch if it all.

03-21-2016, 09:41 AM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Except I don't have a running rotary. FrankenB isn't running yet and that takes priority over my FC..... I know this is a contradiction in terms, but there should be at least one decent FB there RX8 - finally got the PS fixed over the weekend but the air filter is fucked, need a new one of those from Racing Beat because damn REVi, I totally jewed every last cent out of the rear tires and corded both of them I actually have to pull the engine and replace the front cover because the trigger sensor bolt stripped out and the heli-coil got fucked, so the sensor sits a little crooked and the trigger wheel doesn't line up with the center of the sensor, so it misfires horribly over 7k. Sometimes it's so bad it actually drops a rotor and floods half the engine. Oh, new brakes at both ends FC - I conclusively found the issues with the fuel pumps and started rewiring all that shit over the weekend, waiting on some 12Ga tefzel to show up and then I can finish that. Also needs hardlines on the WG's, repack the front bearings, remount the oil coolers, reduct the brakes, make sure there's still some life left in the brakes, replace the Aquamist pump head, replumb some of the AI lines, add a pre-turbo nozzle, dyno the thing, and replace the rear tires in that as I blew them off enough that they're bald in the center. With Frankenb not even started, not having a completed suspension front or rear, and all the other little bullshit things that need to be done with that fucker, yeah, that takes priority. Plus I don't feel like killing myself on that car AGAIN especially with working 50-60 hours a week..... just don't have the desire. I'd like to enjoy myself so the FC will be sitting it out this year. Fuck it.... And, it's a heated ball massager. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-** Last edited by TitaniumTT; 03-21-2016 at 09:44 AM.