I'm Back! '90 GTUs - Page 16

FC Zach · 01-13-2017, 03:00 PM

Quote:

Originally Posted by TitaniumTT

hmmmmmmm You guys are getting me aroused at the though of two days on the dyno

project86 · 01-13-2017, 03:03 PM

8=====D-----

***TitaniumTT*** · 01-13-2017, 03:22 PM

Who's the receptacle?
Nearest airport to joo gaiz?

project86 · 01-13-2017, 03:40 PM

Quote:

Originally Posted by TitaniumTT

Who's the receptacle?
Nearest airport to joo gaiz?

BNA-Nashville

***TitaniumTT*** · 01-13-2017, 04:08 PM

Not bad.... I'm seeing <$300 for roundtrip....

Who's ready right now?
Is there a local Dyno that everyone is friendly with?
I'm totally cereal about this btw

project86 · 01-13-2017, 04:10 PM

Quote:

Originally Posted by TitaniumTT

Not bad.... I'm seeing <$300 for roundtrip....

Who's ready right now?
Is there a local Dyno that everyone is friendly with?
I'm totally cereal about this btw

That's a great price. I'm ready whenever Johnny K is ready.

djmtsu · 01-13-2017, 04:18 PM

JK has the dyno hook up....

***TitaniumTT*** · 01-13-2017, 04:43 PM

Zac should be good to go too.... just needs my craftiness on that hellteck

Zac.... when you see what I do to your timing.... don't be scared

project86 · 05-01-2017, 12:31 PM

So..... me and "Skinny Kyle" got the car running literally the day after DGRR. TPS and essentially a vacuum leak (tube running from the airbox bypassing the MAF and back into intake) were the culprit. Im gonna put my TPS back on and see what happens just to make sure.

FC Zach · 05-01-2017, 01:13 PM

Great news man!

chibikougan · 05-01-2017, 03:39 PM

Quote:

Originally Posted by project86

So..... me and "Skinny Kyle" got the car running literally the day after DGRR. TPS and essentially a vacuum leak (tube running from the airbox bypassing the MAF and back into intake) were the culprit. Im gonna put my TPS back on and see what happens just to make sure.

project86 · 05-01-2017, 03:54 PM

So since the car works now I decided I could order stuff for it and not feel bad. I got a RB oil filter pedestal and an oil pressure gauge. I think mine is not working right.

I also think im going to order some stuff for the interior from LRBSpeed and Techno Toy.

Tomorrow after i get done with my last class I think ill get back under the car and move the drive shaft around ... lots of vibes, and probably get the new trans mounts in.

djmtsu · 05-01-2017, 04:55 PM

The vibes are probably the tires being hella flatspotted!!!!

You need to make, or have made (cough......Zach......cough) a triple gauge DIN plate, and get yourself a water temp and oil temp gauge.

project86 · 05-01-2017, 06:08 PM

Quote:

Originally Posted by djmtsu

The vibes are probably the tires being hella flatspotted!!!!

nah... they look fine. Its the same vibes as before.

Quote:

Originally Posted by djmtsu

You need to make, or have made (cough......Zach......cough) a triple gauge DIN plate, and get yourself a water temp and oil temp gauge.

I just might as him. Im trying to think of good ways to mount that are easy to see. I suppose a DIN panel would work.

FC Zach · 05-01-2017, 06:40 PM

Quote:

Originally Posted by djmtsu

You need to make, or have made (cough......Zach......cough) a triple gauge DIN plate, and get yourself a water temp and oil temp gauge.

No worries, I can try at least.

01-13-2017, 03:03 PM	#227
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	8=====D----- __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

01-13-2017, 03:22 PM	#228
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Who's the receptacle? Nearest airport to joo gaiz? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-13-2017, 04:08 PM	#230
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Not bad.... I'm seeing <$300 for roundtrip.... Who's ready right now? Is there a local Dyno that everyone is friendly with? I'm totally cereal about this btw __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-13-2017, 04:18 PM	#232
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	JK has the dyno hook up.... __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-13-2017, 04:43 PM	#233
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Zac should be good to go too.... just needs my craftiness on that hellteck Zac.... when you see what I do to your timing.... don't be scared __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-01-2017, 12:31 PM	#234
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	So..... me and "Skinny Kyle" got the car running literally the day after DGRR. TPS and essentially a vacuum leak (tube running from the airbox bypassing the MAF and back into intake) were the culprit. Im gonna put my TPS back on and see what happens just to make sure. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-01-2017, 01:13 PM	#235
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Great news man! __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

05-01-2017, 03:54 PM	#237
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	So since the car works now I decided I could order stuff for it and not feel bad. I got a RB oil filter pedestal and an oil pressure gauge. I think mine is not working right. I also think im going to order some stuff for the interior from LRBSpeed and Techno Toy. Tomorrow after i get done with my last class I think ill get back under the car and move the drive shaft around ... lots of vibes, and probably get the new trans mounts in. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-01-2017, 04:55 PM	#238
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	The vibes are probably the tires being hella flatspotted!!!! You need to make, or have made (cough......Zach......cough) a triple gauge DIN plate, and get yourself a water temp and oil temp gauge. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5