1980 rx7 DLIDFIS(gm igniters) install with pics.

warwickben · 08-17-2008, 04:22 PM

its not that hard from what i read.
this guide is for a dp holley but you should be able to make it work for your carb.
http://www.hangar18fabrication.com/blowthru.html

the rb intake kit for a stock port 12a uses a 465 cfm carb. i dont know a whole lot about carbs, but do you think i could use that guide to mod the rb intake kit.

i havea garrett to4b sitting next to my pc i want to use real bad. needs a rebuild, but cant complain about it,got it for 100$ plus shipping.

08-17-2008, 04:22 PM	#1
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	its not that hard from what i read. this guide is for a dp holley but you should be able to make it work for your carb. http://www.hangar18fabrication.com/blowthru.html the rb intake kit for a stock port 12a uses a 465 cfm carb. i dont know a whole lot about carbs, but do you think i could use that guide to mod the rb intake kit. i havea garrett to4b sitting next to my pc i want to use real bad. needs a rebuild, but cant complain about it,got it for 100$ plus shipping. __________________ Last edited by warwickben; 08-17-2008 at 04:25 PM.