Question about your brake kit

Whizbang · 09-10-2008, 11:29 AM

another question, since i am using GSLSE spindles, the assembly PDF says the 1/8" spacer is for non-se cars, so to make sure, that means i do not use the spacer when installing the kit, and just bolt the mount plate to the hub, correct?

bwaits · 09-10-2008, 04:38 PM

Yes, FC wheels need a 1" spacer from what I hear.

THat part of the assembly manual is a mistake. The one that ships with the kits will have that marked out. That is only for the rear kits. A bit of copy/paste mess up.

So, you WILL use the spacers.

-billy

09-10-2008, 11:29 AM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	another question, since i am using GSLSE spindles, the assembly PDF says the 1/8" spacer is for non-se cars, so to make sure, that means i do not use the spacer when installing the kit, and just bolt the mount plate to the hub, correct? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

09-10-2008, 04:38 PM	#2
bwaits Talk - Action = Nothing Join Date: Feb 2008 Posts: 166 Rep Power: 18	Yes, FC wheels need a 1" spacer from what I hear. THat part of the assembly manual is a mistake. The one that ships with the kits will have that marked out. That is only for the rear kits. A bit of copy/paste mess up. So, you WILL use the spacers. -billy