GZ LIM group buy - Page 2

KaiFD3S · 03-06-2008, 04:26 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2.
3.

Oil Pan:
1.
2.
3.

Fuel Rails
1.
2.
3.

proz07 · 03-06-2008, 05:35 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2.
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

ryan1 · 03-06-2008, 07:06 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

KaiFD3S · 03-06-2008, 07:10 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3.

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

treceb · 03-07-2008, 12:10 PM

does their fuel rail provide a location for the fuel temp sensor? or is it like a KG rail but for 4 injectors instead of 2?

Max_Spd · 03-07-2008, 12:15 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)

Oil Pan:
1.proz07
2.
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

d33 · 03-07-2008, 02:47 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4.

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

charlies7 · 03-07-2008, 03:43 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.KaiFD3S (4 Port)
3.

KaiFD3S · 03-07-2008, 04:33 PM

Took myself off the Fuel Rail list as I may be able to use mine...

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

FreeLance · 03-07-2008, 06:44 PM

I'm Mono4lamar on rx7club. What's the price on the 4 port fuel rail? Also, the price from Pineapple racing is 510 so that pretty much makes the retail price 510. I was also hoping for a much better discount. Pending on the price of the fuel rail and hopefully a better group buy price I'll be interested. Thanks!

speedjunkie · 03-07-2008, 08:15 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

glenrx7 · 03-07-2008, 09:22 PM

Ok people, look i am trying to help. Thats it, I stand to make 15 bucks at the most on these. So if you dont like the price go buy it retail. Simple, 525.00 is the manufacturers price ,if some one lowers it than buy it from them. It is not 480.00 I assure you.

railgun · 03-07-2008, 09:35 PM

My question here is that of time. From now, how long would it be to receive this? I'm in a crunch and it's going to be before April, then yea! I'm due to tune and this is kind of last minute and would rather not tune just to slap this on and screw it all up.

Thanks in advance!

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

Brent · 03-07-2008, 10:00 PM

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

13bmaniac · 03-08-2008, 04:59 AM

hello there im 13bmaniac on the rx7club im down with a lim manifold as well not polished.. hope we can still get a better price but still better this way

Manifolds:
1. KaiFD3S ( Not Polished )
2. ryan1 ( not polished)
3. Max_Spd (Not Polished)
4. Charlies7
5. speedjunkie (not polished)
6. Railgun (unpolished)
7. Brent (not polished)
8. 13bmaniac (not polished)

Oil Pan:
1.proz07
2.d33 (Danny)
3.

Fuel Rails
1.proz07 (4 port)
2.
3.

03-07-2008, 02:47 PM	#22
d33 The Newbie Join Date: Mar 2008 Location: Charleston, SC Posts: 25 Rep Power: 0	Im in on the Oil Pan! Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2.KaiFD3S (4 Port) 3.

03-07-2008, 09:35 PM	#28
railgun Rotolicious Join Date: Feb 2008 Location: ORD-LHR Posts: 60 Rep Power: 18	My question here is that of time. From now, how long would it be to receive this? I'm in a crunch and it's going to be before April, then yea! I'm due to tune and this is kind of last minute and would rather not tune just to slap this on and screw it all up. Thanks in advance! Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 5. speedjunkie (not polished) 6. Railgun (unpolished) Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2. 3. __________________ Rc³

03-07-2008, 10:00 PM	#29
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 5. speedjunkie (not polished) 6. Railgun (unpolished) 7. Brent (not polished) Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2. 3. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

03-06-2008, 04:26 PM	#16
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Manifolds: 1. KaiFD3S ( Not Polished ) 2. 3. Oil Pan: 1. 2. 3. Fuel Rails 1. 2. 3.

03-06-2008, 05:35 PM	#17
proz07 Needing a new tow rig. Join Date: Mar 2008 Location: AR Posts: 245 Rep Power: 18	Manifolds: 1. KaiFD3S ( Not Polished ) 2. 3. Oil Pan: 1.proz07 2. 3. Fuel Rails 1.proz07 (4 port) 2. 3.

03-06-2008, 07:06 PM	#18
ryan1 The Newbie Join Date: Mar 2008 Posts: 4 Rep Power: 0	Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Oil Pan: 1.proz07 2. 3. Fuel Rails 1.proz07 (4 port) 2. 3.

03-06-2008, 07:10 PM	#19
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Oil Pan: 1.proz07 2. 3. Fuel Rails 1.proz07 (4 port) 2.KaiFD3S (4 Port) 3.

03-07-2008, 12:10 PM	#20
treceb The Newbie Join Date: Mar 2008 Posts: 4 Rep Power: 0	does their fuel rail provide a location for the fuel temp sensor? or is it like a KG rail but for 4 injectors instead of 2?

03-07-2008, 12:15 PM	#21
Max_Spd The Newbie Join Date: Mar 2008 Posts: 21 Rep Power: 0	Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) Oil Pan: 1.proz07 2. 3. Fuel Rails 1.proz07 (4 port) 2.KaiFD3S (4 Port) 3.

03-07-2008, 03:43 PM	#23
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago Posts: 319 Rep Power: 18	Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2.KaiFD3S (4 Port) 3.

03-07-2008, 04:33 PM	#24
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Took myself off the Fuel Rail list as I may be able to use mine... Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2. 3.

03-07-2008, 06:44 PM	#25
FreeLance The Newbie Join Date: Mar 2008 Location: New York Posts: 27 Rep Power: 0	I'm Mono4lamar on rx7club. What's the price on the 4 port fuel rail? Also, the price from Pineapple racing is 510 so that pretty much makes the retail price 510. I was also hoping for a much better discount. Pending on the price of the fuel rail and hopefully a better group buy price I'll be interested. Thanks!

03-07-2008, 08:15 PM	#26
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 5. speedjunkie (not polished) Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2. 3.

03-07-2008, 09:22 PM	#27
glenrx7 Rotary Fanatic Join Date: Feb 2008 Location: Arizona Posts: 199 Rep Power: 18	Ok people, look i am trying to help. Thats it, I stand to make 15 bucks at the most on these. So if you dont like the price go buy it retail. Simple, 525.00 is the manufacturers price ,if some one lowers it than buy it from them. It is not 480.00 I assure you.

03-08-2008, 04:59 AM	#30
13bmaniac Rotary Fan in Training Join Date: Mar 2008 Posts: 57 Rep Power: 18	hello there im 13bmaniac on the rx7club im down with a lim manifold as well not polished.. hope we can still get a better price but still better this way Manifolds: 1. KaiFD3S ( Not Polished ) 2. ryan1 ( not polished) 3. Max_Spd (Not Polished) 4. Charlies7 5. speedjunkie (not polished) 6. Railgun (unpolished) 7. Brent (not polished) 8. 13bmaniac (not polished) Oil Pan: 1.proz07 2.d33 (Danny) 3. Fuel Rails 1.proz07 (4 port) 2. 3.