Cooling System Mods - Rotary Car Club

Barry Bordes Cooling System Mods 05-01-2008, 11:11 AM

My5ABaby This heat problem also leads... 05-01-2008, 11:38 AM

Barry Bordes I never load the engine cold.... 05-09-2008, 10:59 AM

Phoenix7 ^^very good point BUT Mazda... 05-01-2008, 07:51 PM

jgrewe Basically you make grooves in... 05-01-2008, 08:05 PM

Barry Bordes Most people do the Racing... 05-02-2008, 06:55 AM

Phoenix7 sounds reasonable, is this... 05-01-2008, 08:06 PM

blwnrtr93 From what I've seen of water... 05-02-2008, 03:56 AM

Phoenix7 "Another problem Toyo Kogyo... 05-02-2008, 12:08 AM

My5ABaby Is there any documentation on... 05-02-2008, 06:47 AM

Barry Bordes I will put pictures soon. ... 05-02-2008, 03:37 PM

Barry Bordes Phoenix7, do you have... 05-02-2008, 03:50 PM

Phoenix7 No pics at this moment. I'll... 05-02-2008, 05:53 PM

Barry Bordes The stock 3rd gen water pump... 05-02-2008, 07:12 AM

Barry Bordes I actually did two housing... 05-02-2008, 05:40 PM

Phoenix7 so the info about the cooling... 05-02-2008, 09:09 PM

-xlr8planet- Im doing the water jacket... 05-03-2008, 02:36 AM

-xlr8planet- http://farm3.static.flickr.com... 05-03-2008, 09:28 PM

Chadwick Another place to look is the... 05-03-2008, 09:50 PM

vex You actually release more... 07-16-2008, 08:21 PM

Barry Bordes Yes it does. I would like to... 07-21-2008, 10:46 AM

More replies below current depth...

-xlr8planet- Just for the record: to do... 05-03-2008, 10:07 PM

Barry Bordes On my next set of housings I... 05-08-2008, 06:39 AM

Barry Bordes I am thinking that we need to... 06-16-2008, 10:13 AM

Phoenix7 damn, i see what you did. ... 06-18-2008, 07:22 PM

Barry Bordes Normally 14 but up to 20 psi.... 06-22-2008, 06:43 AM

Herblenny Very Interesting Barry! I... 06-27-2008, 11:09 AM

Barry Bordes This will be my next test. ... 07-11-2008, 05:50 AM

Cp1 Haha i would love to do this!... 08-03-2008, 07:46 AM

Barry Bordes Cp1, how would you propose to... 09-05-2008, 05:15 AM

Cp1 Sorry for the delay forgot... 10-21-2008, 06:00 AM

classicauto Doing some housing mods for a... 07-31-2008, 11:09 AM

Barry Bordes My best guess would be to... 08-03-2008, 06:20 AM

Phoenix7 can't wait to see the results... 09-09-2008, 03:37 PM

nissanconvert subscribed 10-15-2008, 06:46 AM

classicauto Attached a pic of one of the... 10-21-2008, 06:32 PM

Barry Bordes Sounds good. Can't wait to... 10-24-2008, 05:57 AM

classicauto Didn't think about fusing... 02-02-2009, 05:37 PM

vex You'd have to look at the... 02-02-2009, 06:22 PM

howard coleman congrats on an excellent... 01-31-2009, 09:12 PM

Barry Bordes Glad to see you over here... 02-01-2009, 11:16 AM

Barry Bordes Here is a product that may... 02-10-2009, 11:52 AM

10-21-2008, 06:00 AM

#28

Cp1

Rotary Fanatic

Join Date: Mar 2008

Location: Sask, Canada

Posts: 181

Rep Power: 18

Quote:

Originally Posted by Barry Bordes

Cp1, how would you propose to fuse the new fins in? Could a piece of aluminum square tubing be used? (harder to machine two grooves but a lot more surface area!)
Barry

Sorry for the delay forgot which section this discussion was in and couldnt find it. but to answer your question i would just mill straight down the width of the housing, so longitudinally front to back if you would were looking at the motor built and in your car. i wouldnt add metal to the housing just take some away in logical places. ive been busy working on this for a little while so i should have something to show soon.

This weekend im going to the wrecker and ill see if i can grab some garbaged ones to use as an example.

__________________

Quote:

As the length of an online discussion nears infinity, the probability of a comparison involving Hitler or the Nazis approaches unity.

Quote:

Re-upholster your FD's console or anything else... ask me how! Thread: http://rotarycarclub.com/rotary_foru...ead.php?t=5157

Last edited by Cp1; 10-21-2008 at 06:04 AM.