Rotorhead87's Cosmo 13B-RE FC3S build-up

rotorhead87 · 12-08-2008, 06:51 PM

As of now it still needs a alittle bit of wiring to do, finish up the intake for the turbo, and plumbing the fuel system. I have to save up for new stainless steel lines and fittings for the fuel system<---not so cheap. You'll see the fuel system setup on my next update.

Here's an example picture of what the laptop hooked up to the ECU would show.

12-08-2008, 06:51 PM	#11
rotorhead87 Rotors > Pistons Join Date: Sep 2008 Location: Port Saint Lucie, Florida Posts: 316 Rep Power: 18	As of now it still needs a alittle bit of wiring to do, finish up the intake for the turbo, and plumbing the fuel system. I have to save up for new stainless steel lines and fittings for the fuel system<---not so cheap. You'll see the fuel system setup on my next update. Here's an example picture of what the laptop hooked up to the ECU would show.