AZRR CYM FD Build Coming Together

RCCAZ 1 · 12-22-2008, 12:50 PM

Forgot to post these up earlier. The engine pull shot should have been the first in my thread

Also, wanted to give props to Glen at AZRR and show off the excellent port job on my plates and housings. Beautiful, beautiful work!

RCCAZ 1 · 12-30-2008, 09:15 PM

Well, we finally brought her home yesterday. Can't wait to get it installed and fired up. Thanks again to Glen and Tom from Arizona Rotary Rockets for all your hard work. Here's a couple of pics of the engine being loaded up by Glen (left) and Tom (right). Also, a shot of her sitting in my garage (but not for long). It was SOooo cool to have the engine delivered in Tom's REPU!!

RCCAZ 1 · 12-30-2008, 09:25 PM

Got back from visiting my welder this morning. Completed our patchwork on the bottom of the Koyo. Patched 2 holes and moved the drain plug as you can see. Also tacked up my intercooler mounting brackets and installed for a test fit. Turned out incredible (IMO). Next up will be getting the engine installed and completing fabrication of my radiator end tanks with the motor in the car to verify correct positioning and angles for the radiator IN and OUT hoses.

RCCAZ 1 · 01-03-2009, 09:09 PM

Friday, January 2, 2009... thanks to those RCCAZ members who stopped over today to assist and support us in installing my engine. We got it in hooked up to the tranny and installed the motor mounts. Now, just a few days of hooking everything up, then finishing my fab work on the Vmount and remotely locating my battery and we'll take a shot a firing her up. Here's a pic of yesterday's installation activities and a shot of the IC in place for fitment purposes. Looks like it's gonna be sweet!!