Parting out 1991 Vert

JunpoweR · 01-28-2009, 04:43 PM

I just received a 1991 Convertible FC3s in decent condition complete.

Parts thet are not for sale:
Long Block/Transmission/Shaft.
Front subframe/suspension/struts

All prices are OBO.

Vert convertible motors $25 each
Seat belts $30 each
Interior door panels $40 each
Rear bumper $40
Trunk Lid $50
Rear Tail light Set with Lic plate holder $120
Rear interior carpet and wind shield panel $100
Door panels $50 each
Doors complete without panels & switches but guts/door seal there $150 each
Convertible top switch and mirror switches and panel $40
Rear Subframe/Diff/suspension/Struts/arms/$250
Steel Hood $20
Clutch Slave & hose $10
Clutch master $20
5 lug rotors and calipers (rear) $100
Stock Brake Lines $20

Stock I can also cut off parts of the car for those of you who damaged a 1/4 panel or rocker let me know. If there are any other parts I have not mentioned please feel free to PM about anything.

Whizbang · 01-28-2009, 08:08 PM

i would love the lights if i wasnt broke.

JunpoweR · 01-28-2009, 10:57 PM

Quote:

Originally Posted by Low Impedance

i would love the lights if i wasnt broke.

Are you talking about the tail lights or the headlights?

Whizbang · 01-29-2009, 06:53 PM

tail lights. I have an S4 vert.

rotoriousrx7 · 01-30-2009, 12:44 AM

willing to sell the air filter kit ? i had a retard moment the other night, i have a s4 kn filter kit and i just bought a 90 vert so... i was like sweet ill put this on the vert and after taking the air box apart i was like oh wtf im stupid, but not to rant that would be nice to get thanks

JunpoweR · 02-20-2009, 05:03 AM

Sold List:

Filter kit
Tail lamps
FC66
Dr side door harness
Dash
Spedo Cable
Fog Light switch

JDriftM · 02-21-2009, 01:27 AM

PM sent

Nopis1O · 02-21-2009, 03:34 AM

how much for driver side door handle?

sen2two · 02-21-2009, 05:25 AM

is there any difference between the vert. fuel pump bracket and float level and a TII one? the fuel pump dosnt matter, i'll be adding a walbro...

as long as its the same as an NA or TII s5 i'll take it. how much shipped to kissimmee florida 34743?

Max777 · 02-22-2009, 02:02 AM

I really want the driver side door (mine is DONE), but I think that shipping from Cali might be way too expensive?

JunpoweR · 03-02-2009, 05:34 PM

Quote:

Originally Posted by Nopis1O

how much for driver side door handle?

Inner or outter?

Quote:

Originally Posted by sen2two

is there any difference between the vert. fuel pump bracket and float level and a TII one? the fuel pump dosnt matter, i'll be adding a walbro...

as long as its the same as an NA or TII s5 i'll take it. how much shipped to kissimmee florida 34743?

Sold

Quote:

Originally Posted by Max777

I really want the driver side door (mine is DONE), but I think that shipping from Cali might be way too expensive?

Greyhound might not be that bad

01-28-2009, 08:08 PM	#2
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	i would love the lights if i wasnt broke. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-29-2009, 06:53 PM	#4
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	tail lights. I have an S4 vert. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

02-20-2009, 05:03 AM	#6
JunpoweR Rotary Fan in Training Join Date: May 2008 Posts: 66 Rep Power: 0	Sold List: Filter kit Tail lamps FC66 Dr side door harness Dash Spedo Cable Fog Light switch __________________ --^v--JunpoweR--^v-- "90 GTUs Crystal White GT35 WB TA Project "90 GTUs Brilliant Black Restoration 1984 GSL-SE Daily

02-21-2009, 03:34 AM	#8
Nopis1O Rotary Fanatic Join Date: Apr 2008 Location: Mid State Illinois Posts: 159 Rep Power: 18	how much for driver side door handle? __________________ 1988 Fc Vert. Super Stock 1990 Fc Hard top: Brideported 13b, weber carb, 350z wheels w/nitrogen, or 16in BBS meshies, Msd, Racaro Racing Seats, Custom Gauge cluster, custom Intake, Relocated Battery, 3inch header back borla exhaust system, Alpine stereo system, Wire tucked, S4 shift boot&knob, custom Strut bar, And soon to come a Full black w/ gold pearl paint job, powder coated break calipers, all black interior, bride headliner/door panels.

02-21-2009, 05:25 AM	#9
sen2two KTEC Join Date: Jan 2009 Posts: 642 Rep Power: 0	is there any difference between the vert. fuel pump bracket and float level and a TII one? the fuel pump dosnt matter, i'll be adding a walbro... as long as its the same as an NA or TII s5 i'll take it. how much shipped to kissimmee florida 34743? __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

01-30-2009, 12:44 AM	#5
rotoriousrx7 Rotary Fan in Training Join Date: Mar 2008 Location: 37072 Posts: 43 Rep Power: 0	willing to sell the air filter kit ? i had a retard moment the other night, i have a s4 kn filter kit and i just bought a 90 vert so... i was like sweet ill put this on the vert and after taking the air box apart i was like oh wtf im stupid, but not to rant that would be nice to get thanks

02-21-2009, 01:27 AM	#7
JDriftM Dedicated Rotorhead Join Date: Nov 2008 Location: Cincinnati, OH Posts: 92 Rep Power: 17	PM sent

02-22-2009, 02:02 AM	#10
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	I really want the driver side door (mine is DONE), but I think that shipping from Cali might be way too expensive? __________________ Rotaries:They are NOT that complicated!