gasket sealer or no gasket sealer?

***TitaniumTT*** · 03-27-2009, 07:37 AM

Yup, I've always used RTV on both sides of the gaskets. Blue or black for coolant. I used black this time around because the iron, housing, and pump were..... well - black.

A little bit goes along way though, and whatever squeezes out that you can see, its a good bet that the same amount has squeezed out on the inside too. So, if it's too much, don't hesitate to pull it apart and clean a little up an re-apply.

03-27-2009, 07:37 AM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yup, I've always used RTV on both sides of the gaskets. Blue or black for coolant. I used black this time around because the iron, housing, and pump were..... well - black. A little bit goes along way though, and whatever squeezes out that you can see, its a good bet that the same amount has squeezed out on the inside too. So, if it's too much, don't hesitate to pull it apart and clean a little up an re-apply.