TitaniumTT's I hope I make it to DGRR '09 Build

***TitaniumTT*** · 03-30-2009, 12:59 AM

Quote:

Originally Posted by s4.5 turbo gxl

i am completely envious of the extent of your build. but my car is in the very beginning of the build. just finally got the bay completly stripped and working of cleaning cleaning and more cleaning.

Thanks!

Quote:

Originally Posted by Max777

BTW, to update my earlier comment:

What I like in the build the most, is that this car follows both Function AND form! To me, this aspect is very important, because a lot of people tend to focus on one and ignore the other.

LOL.... a good friend of mine was helping me stab the motor in today and was making some comments about the "form" aspect of it. He seems to think that its a little much. So my comment was, "So you're saying that when we do your car, if we can't get an oddball fastener in Stainless, you're not going to powdercoat it?"

He sighed and rolled his eyes as I pointed out a few bolts that I powdercoated last night

Quote:

Originally Posted by WE3RX7

Its been a long weekend, where's an update, lol....

Agree w/ Max BTW...

Thanks... update coming now as I just got out of the shower after spending a LONG time on it today. Some bad things happened.... dropped a washer and couldn't find it. Thought maybe it fell into the y-pipe... took the compressor housings off the turbos.......... SUCK. A few other little things slowed us down. Hoping to fire her off tomorrow....... err later today at this point.... sigh.

Quote:

Originally Posted by nolimitind

This is crazy man! I thought I was the only one that had this wild idea that my FC would be ready by DGRR 09. What was supposed to be a 7 year project for myself and my 9yo son was jump started 3 weeks ago when I trailered a dead TII back to the shop. Now the project has turned into a 6 week deal. As of this past week we were still pulling things off. This week and until 4/15 we will be busy installing the new stuff and fabbing up the new parts.

Not trying to jack your thread...just wanted to say that you are not alone brother and great work so far. If you need some help on that aluminum welding let me know...I tig everyday. Let's get these cars ready and hookup at the Gap!

Todd B.

Thanks Todd. Definately come find me. My TIG'ing has improved greatly once I got a powersouce that could handle the 60A that the machine needs. Trying to weld 1/4" AL with 110-115A just won't cut it.

need RX7 · 03-30-2009, 01:17 AM

Sexy build, man.

You have good skillz.

***TitaniumTT*** · 03-30-2009, 01:23 AM

Quote:

Originally Posted by need RX7

Sexy build, man.

You have good skillz.

Thanks

So here's why my engine harness is specieal. It plugs into the firewall

Never again will I have to drop a motor in, run a harness, and then put the engine back together. I've gotten spoiled.

Chassis harness run.... top secret, I should even be showing this off.

Oil Coolers installed

Bulkhead fitting for the oil coolers

And the oil coolers plumbed

***TitaniumTT*** · 03-30-2009, 01:27 AM

Tight fitting fitting. 120* I believe. Yes they are run in series and yes I have my reasons for it

Mocal Oil T-Stat

And finally in its new home

Intake piping

***TitaniumTT*** · 03-30-2009, 01:29 AM

I'd say, "look what arrived from the powdercoater," but I am the powdercoater. I leave you all with this teaser pic of a frame I built to mount some "stuff." The stuff will be mounted later today.....

I can stand on the end closest to the motor and only get ~1/2" of deflection out of it. Shit is STRONG. All 6061 AL

need RX7 · 03-30-2009, 01:43 AM

http://www.youtube.com/watch?v=4pXfHLUlZf4

I can't wait to see this thing finished. Freaking awesome. That firewall harness connector is genius!

vex · 03-30-2009, 02:06 AM

Quote:

Originally Posted by TitaniumTT

Thanks

So here's why my engine harness is specieal. It plugs into the firewall

Never again will I have to drop a motor in, run a harness, and then put the engine back together. I've gotten spoiled.

Do you know how much I hate you right now? Just kidding.. I love you, but I hate how poor I am so I can't get my cannon plugs yet

Quote:

Chassis harness run.... top secret, I should even be showing this off.

Gank... Actually, I may not do that yet since I don't have the cannon plugs and the hassle of trying to modify that harness to work would piss me off... But some day.

13bpower · 10-17-2009, 09:48 PM

Quote:

Originally Posted by TitaniumTT

Thanks

So here's why my engine harness is specieal. It plugs into the firewall

Never again will I have to drop a motor in, run a harness, and then put the engine back together. I've gotten spoiled.

Chassis harness run.... top secret, I should even be showing this off.

Oil Coolers installed

Bulkhead fitting for the oil coolers

And the oil coolers plumbed

I think i busted a nut.....

EJayCe996 · 10-18-2009, 02:10 PM

LOL, I just realized we went the same route with the fittings. Even though my car is red, something just irked me about having red and blue (contrasting colors) AN fittings in, and around, my bay and I got a shit-ton of black fittings. I've gone the braided nylon hose route though.

Lets see if Mazda lets me link directly to their jazz.

NoDOHC, how about beating Mazda to the punch with their injector setup on the 16x instead?

need RX7 · 10-18-2009, 02:36 PM

Quote:

Originally Posted by EJayCe996

LOL, I just realized we went the same route with the fittings. Even though my car is red, something just irked me about having red and blue (contrasting colors) AN fittings in, and around, my bay and I got a shit-ton of black fittings.

+1! I greatly dislike the red/blue combo as well. When I start building my car, it will be all black fittings.

Quote:

Originally Posted by EJayCe996

I've gone the braided nylon hose route though.

How is it working out? I thought about using that too (for it's sleeper-ness), but I don't have any info on how it would hold up compared to SS braided lines to pressure and temperature.

EJayCe996 · 10-18-2009, 03:29 PM

Quote:

Originally Posted by need RX7

+1! I greatly dislike the red/blue combo as well. When I start building my car, it will be all black fittings.

How is it working out? I thought about using that too (for it's sleeper-ness), but I don't have any info on how it would hold up compared to SS braided lines to pressure and temperature.

Its rated for up to 350psi and 300 degrees. I've seen an MR-2 in person that seemed to have no problems running all nylon lines. It's not a rotary but I'd be worried about other things if any of my hoses had to deal with 300 degree fluids, LOL.

I took a pic of it, lemme find it....

***TitaniumTT*** · 03-30-2009, 01:18 AM

Alright, so here's the update. Got the engine finally assembled late Friday night. Here's a few shots of that.

Turbo's finally . FINALLY finished.

I also modified the stock oil pan and powdercoated it. Banzai pan brace as well

Shots of the completed engine

And my Exedy twin disc clutch. I LIKE this clutch. Its a little grabby, but not nearly as hard a pedal as the old ACT with the Extreme PP. I used to love stiff clutchs, the stiffer the better, than I had ~65% of the cartilidge removed from my left knee. Now I don't Like them so much.

03-30-2009, 01:17 AM	#2
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	Sexy build, man. You have good skillz. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

03-30-2009, 01:43 AM	#6
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	http://www.youtube.com/watch?v=4pXfHLUlZf4 I can't wait to see this thing finished. Freaking awesome. That firewall harness connector is genius! __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

10-18-2009, 02:10 PM	#9
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX Posts: 283 Rep Power: 18	LOL, I just realized we went the same route with the fittings. Even though my car is red, something just irked me about having red and blue (contrasting colors) AN fittings in, and around, my bay and I got a shit-ton of black fittings. I've gone the braided nylon hose route though. Lets see if Mazda lets me link directly to their jazz. NoDOHC, how about beating Mazda to the punch with their injector setup on the 16x instead? __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology. Last edited by EJayCe996; 10-18-2009 at 02:15 PM.