My FC is chugging along (not good)

djmtsu My FC is chugging along (not... 04-20-2009, 05:34 PM

vex your running on one rotor it... 04-20-2009, 10:34 PM

Rx-7fetish Ditto. Just because both... 04-20-2009, 11:47 PM

Phoenix7 :( sorry man that sounds... 04-20-2009, 10:54 PM

IH8DSM if it was fuel i wouldnt... 04-20-2009, 11:46 PM

Rx-7fetish A wiring issue could cause... 04-20-2009, 11:50 PM

Whizbang The needle for the boost... 04-21-2009, 01:06 AM

djmtsu When I free rev it, the boost... 04-21-2009, 06:48 AM

My5ABaby I'm not sure I believe it's... 04-21-2009, 07:16 AM

Boostmaniac That horrible hammering... 04-21-2009, 08:47 AM

djmtsu Anyone think it threw a... 04-21-2009, 08:59 AM

djmtsu Fuckit. Towing it home this... 04-21-2009, 10:16 AM

FerociousP so you are going to tow it... 04-21-2009, 11:19 AM

djmtsu Garage bitch. 04-21-2009, 11:34 AM

Rx-7fetish garage huh? well arent you... 04-21-2009, 12:54 PM

vex I say it's a mouse that got... 04-21-2009, 02:38 PM

rx4ur7 Afraid it sounds like a... 04-21-2009, 02:55 PM

djmtsu My next question is, how the... 04-21-2009, 02:59 PM

rx4ur7 Bad install, bad bearing to... 04-21-2009, 06:40 PM

djmtsu Don't think that is it. I... 04-22-2009, 02:29 PM

My5ABaby Check your PMs DJ. :icon_tup: 04-23-2009, 11:28 AM

TehMonkay Check your electrical... 04-23-2009, 09:28 PM

djmtsu I think I found out what the... 04-25-2009, 06:44 PM

NoDOHC Keep us posted, I hope... 04-26-2009, 04:35 AM

Mobius Since the AFM wasn't set... 05-07-2009, 10:01 PM

Phoenix7 +1 used injectors? How... 09-27-2009, 02:52 PM

djmtsu Finally got around to... 09-27-2009, 09:02 AM

josh18_2k v8 time! :willy_nilly: 09-27-2009, 12:47 PM

Phoenix7 :cuss: and your car looks... 09-27-2009, 02:48 PM

Whizbang hammer time? 09-27-2009, 01:55 PM

djmtsu The injectors were in the... 09-27-2009, 03:01 PM

TitaniumTT If the car sat for a long... 09-27-2009, 03:30 PM

classicauto "Want to Buy: old rotten... 09-29-2009, 03:51 PM

djmtsu [Bob Saget]I've sucked dick... 09-29-2009, 08:55 PM

TitaniumTT :rofl: Hell man, pull your... 09-30-2009, 06:45 AM

Whizbang injectors do have some small... 09-27-2009, 03:34 PM

djmtsu All true. And after it sat... 09-27-2009, 03:39 PM

rx7 FC TII im having a very similar... 09-29-2009, 09:46 AM

Whizbang yea it does quite a bit after... 09-29-2009, 05:56 PM

IH8DSM So do I get to help tear... 09-30-2009, 12:06 AM

djmtsu S5....no flapper, just a... 09-30-2009, 07:42 AM

FC3S Murray Fiveomotorsport.com Good... 10-01-2009, 07:21 AM

djmtsu Pretty sure I can get stock... 10-01-2009, 08:20 AM

djmtsu Welcome back thread. I... 12-23-2009, 08:24 PM

Max777 you can test an afm for... 12-24-2009, 04:36 AM

djmtsu Yeah I could test all of it,... 12-24-2009, 09:09 AM

04-21-2009, 02:59 PM	#1
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	My next question is, how the hell would a bearing fail with only about 16K on the engine? And the oil checked and changed religiously? Also why am I getting great oil pressure? Wouldn't bearing failure read low pressure? Or no pressure? That sucks, because if it is a bearing that is going to be alot more expensive to rebuild than I had planned. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5 Last edited by djmtsu; 04-21-2009 at 03:14 PM.