3rd gen Alignment specs from Pettit Racing

[Herblenny]

This is what I got..

Decide to go more towards street..

FRONT
Camber: -0.3
Caster: 6.6
Toe: 0.03in

REAR
Camber: -1.2
Toe: 0.05in

Car rides OK with the Delrin Bushings, H&R, Koni Yellows, RB front sway, RB sway brace...

[Chadwick]

Originally Posted by Herblenny

This is what I got..

Decide to go more towards street..

FRONT
Camber: -0.3
Caster: 6.6
Toe: 0.03in

REAR
Camber: -1.2
Toe: 0.05in

Car rides OK with the Delrin Bushings, H&R, Koni Yellows, RB front sway, RB sway brace...

Phil, I would not run any tow on the street, toe is what wears out tires. With the small amount you’re running, it will make no real difference in handling anyway. Pettit's track settings are very conservative; I run -2.5 all the way around for camber, and around 3 caster. Too much caster will actually increase tire lift in corners. For Toe I run 0 front and .16" in on the rear. My setting are for track, not street use.