flooding out FC3S4 N/A - Rotary Car Club

		Rotary Car Club > Tech Discussion > RX-7 2nd Gen Specific (1986-92)
flooding out FC3S4 N/A

RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections.

Shadow24v flooding out FC3S4 N/A 02-13-2009, 07:47 AM

Ender Low compression is a likely... 02-13-2009, 09:58 AM

Shadow24v i thought 80-90 psi... 02-13-2009, 10:31 AM

Max777 you know, that might have... 02-13-2009, 11:54 AM

My5ABaby The S5 cuts fuel if you put... 02-13-2009, 06:46 PM

Whizbang injector problems CAN be the... 02-13-2009, 11:13 AM

vex 90 is rebuild time. My NA... 02-13-2009, 12:55 PM

Shadow24v well, i can't afford a... 02-13-2009, 01:02 PM

Max777 I know I will need to rebuild... 02-13-2009, 01:09 PM

Flooder 50-60 psi is really low, even... 02-13-2009, 01:58 PM

Shadow24v any particular reason you... 02-13-2009, 02:14 PM

vex The only way to save money on... 02-13-2009, 02:37 PM

DJMOJO no not really. if you tear... 04-10-2009, 09:37 AM

vex Why on earth would you need a... 04-10-2009, 10:56 AM

Shadow24v ok, ill see what happens with... 02-13-2009, 02:42 PM

vex There are, but their prices... 02-13-2009, 03:07 PM

Flooder Well like its been said... 02-13-2009, 06:07 PM

Shadow24v well, i sent out the final... 04-01-2009, 11:44 AM

Whizbang technically yes. Only reason... 04-01-2009, 11:51 AM

Shadow24v I thought so. ill keep that... 04-01-2009, 11:55 AM

Max777 /\ Good point, and besides,... 04-10-2009, 11:02 AM

12arotary i'm just curious why your... 04-10-2009, 12:24 PM

Shadow24v college intern + making crap... 04-10-2009, 12:31 PM

12arotary Or you could make the point- ... 04-10-2009, 07:24 PM

vex If the parts are in spec,... 04-10-2009, 08:03 PM

DJMOJO thats the point i was trying... 04-10-2009, 10:29 PM

vex Let me put it this way: You... 04-10-2009, 10:38 PM

DJMOJO id still toss the old one. i... 04-11-2009, 10:16 AM

vex :beatdeadhorse5: Even with... 04-11-2009, 11:51 AM

Shadow24v Well, i towed my "new" rx-7... 04-20-2009, 08:30 AM

Red Dragon lol, I "think" there is... 04-20-2009, 09:03 AM

Shadow24v Well, tried to start the 7... 04-22-2009, 06:29 PM

NoDOHC You should charge the battery... 04-22-2009, 07:40 PM

Shadow24v Its a brand new battery but i... 04-22-2009, 07:52 PM

NoDOHC You can get the coils for... 04-22-2009, 09:42 PM

Shadow24v ahh ok, i did find a set of... 04-22-2009, 10:25 PM

Shadow24v well, i fiddled with the 7... 04-23-2009, 09:39 PM

TehMonkay Check voltage to leading... 04-23-2009, 09:49 PM

NoDOHC You may have a serious vacuum... 04-23-2009, 10:16 PM

Shadow24v well, for one i saw that the... 04-24-2009, 08:18 AM

Rx-7fetish http://www.mazdatrix.com/getpr... 04-24-2009, 11:28 AM

Shadow24v ^ -- thanks :) i was able to... 04-24-2009, 07:45 PM

More replies below current depth...

Whizbang whats your exhaust system... 04-25-2009, 01:32 AM

Shadow24v well, found out what the... 04-25-2009, 07:47 AM

Whizbang we have this in our FAQ as... 04-25-2009, 01:44 PM

Shadow24v hmmm, i haven't been able to... 04-25-2009, 03:34 PM

Whizbang for the 1st gen, 2nd gen and... 04-25-2009, 03:36 PM

Shadow24v ok, i did download the FSM so... 04-25-2009, 04:16 PM

My5ABaby Call Ray Crowe at Malloy... 04-25-2009, 04:42 PM

Shadow24v do they ship?im in OH lol ... 04-26-2009, 09:19 AM

vex Yes, they ship. I know for... 04-26-2009, 07:43 PM

Shadow24v AFAIK it is, it only idled... 04-27-2009, 08:14 AM

vex a properly set idle and an... 04-27-2009, 09:58 AM

Shadow24v oh? what are the criteria for... 04-27-2009, 10:46 AM

vex Look up the procedure in the... 04-27-2009, 10:52 AM

Shadow24v ill look into that if it... 04-27-2009, 10:43 PM

Shadow24v picked up the new starter... 04-28-2009, 12:14 PM

vex huh? The upper bolt hole... 04-28-2009, 03:01 PM

Shadow24v yeah, the top one was... 04-29-2009, 06:22 AM

TehMonkay Fuel tank drops out pretty... 04-28-2009, 01:10 PM

vex gas/oil, did one of your... 04-29-2009, 10:11 AM

Shadow24v beats me, it was mostly blue... 04-29-2009, 04:22 PM

Shadow24v re-read your post, it was... 04-29-2009, 07:24 PM

vex I saw your problem! A magic... 04-29-2009, 10:42 PM

Shadow24v i'll check the MOP (getting... 04-30-2009, 10:06 AM

Shadow24v well, it looks like its eaten... 04-30-2009, 01:06 PM

Rx-7fetish :nopity: 04-30-2009, 03:47 PM

More replies below current depth...

NoDOHC The MOP can't use anywhere... 04-30-2009, 11:03 PM

Shadow24v what about if the MOP had... 05-02-2009, 11:10 AM

Rx-7fetish Thats what i was thinking,... 05-02-2009, 03:37 PM

Shadow24v thats ok, i found an S4 in... 05-04-2009, 12:25 AM

Shadow24v well, got the MOP, lines, and... 05-04-2009, 09:44 PM

Force Fed Good to see you got it... 05-04-2009, 10:33 PM

Shadow24v lol, maybe i can do a quick... 05-05-2009, 06:56 AM

NoDOHC Just read the FSM, if... 05-05-2009, 10:35 PM

TehMonkay rotaryaviation.com Make... 05-06-2009, 11:07 AM

Shadow24v well, ive been thinking: ... 05-13-2009, 08:40 AM

TehMonkay Yeah, it's possible, as long... 05-13-2009, 12:40 PM

Shadow24v ahh, ill have to keep that in... 05-13-2009, 02:46 PM

My5ABaby There's no way the OMP is... 05-13-2009, 03:55 PM

Prev

Previous Post

Next Post

Next

Old

04-28-2009, 03:01 PM

#16

vex

RCC Loves Me Not You

Join Date: Jul 2008

Location: Influx.

Posts: 2,113

Rep Power: 20

vex will become famous soon enough

Quote:

Originally Posted by Shadow24v

View Post

picked up the new starter today and its a MUCH beefier unit than the one i pulled out. about 1/2"-1" larger diameter on the motor casing and they helicoiled one of the bolt holes. the upper one i believe, that had the long bolt through the rear end plate and a nut to hold the starter in place. i'll see how it fits today, i don't foresee a problem but you never know lol

huh?

The upper bolt hole is a through hole. You're supposed to have a nut and bolt connect on the upper. If they helicoiled the lower, I could see that.

__________________
The Official FC Radiator Thread My Project Thread: Cerberus CCVT
Virginia Rotary Group

vex is offline

Reply With Quote

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 01:53 AM.