FS: 87 TII roller/project....

jtbshaw · 06-08-2009, 03:06 PM

I picked this car up from Luis (Phil's builder in Attalla, AL) and had planned to build it for my son. We later found a very nice one to replace this one (thanks Phil and Bryan@BNR). It is a TII that still has the rear differential, axles, aluminum non-TII hood, front TII brakes and decent carpet/dash. It had a manual steering rack in it, but I pulled it to swap to my son's car. I will mount the power rack in this car so that it can be steered. Paint needs work, but overall not a bad body. The front driver's fender is off but I have a replacement, and no mirrors and no seats. I have the title in hand. What I don't have is a bunch of time. If you want it, $300 obo for the whole car and you can have it and the title.

Please keep in mind, this will either be a parts car or a complete resto. This car will needs lots of work to put back on the road, but I hate to see it go to the crusher...which it will if no one buys it within the next few weeks.

Todd B.
205-259-3145

***pics are from right after I pressure washed the car. It has been sitting in my spare lot since 11/08.

jtbshaw · 06-08-2009, 03:21 PM

Oh, and the car is located in Pelham, AL...just South of Birmingham.

Mazdaracer4fun · 06-10-2009, 11:00 PM

omg if you were closer to ohio i would take that car in a heartbeat! .... any chance you would deliver? lol

Red Dragon · 06-11-2009, 12:43 PM

Todd, how about selling me all the stuff I need for a 5-lug swap including wheels. That's if noone buys the car. I'd give you 300-400 for those alone.

need RX7 · 06-11-2009, 02:41 PM

Quote:

Originally Posted by Red Dragon

Todd, how about selling me all the stuff I need for a 5-lug swap including wheels. That's if noone buys the car. I'd give you 300-400 for those alone.

Argh, I was about to inquire about the same thing

Red Dragon · 06-11-2009, 03:00 PM

Lol sorry

jtbshaw · 06-12-2009, 10:11 AM

Roy, how about you pay me $300 for the 5 lug setup with wheels and I give you the car????? This thing is going to the crusher by the end of the month if someone doesn't pick it up.....5 lug setup and everything.

jtbshaw · 06-12-2009, 10:12 AM

I also have a set of TII wheel with rubber that I need to sale also. Rubber needs replacing but they hold air. $100 for the set!

Red Dragon · 06-12-2009, 10:46 AM

Quote:

Originally Posted by nolimitind

Roy, how about you pay me $300 for the 5 lug setup with wheels and I give you the car????? This thing is going to the crusher by the end of the month if someone doesn't pick it up.....5 lug setup and everything.

Blah, but I have no room for the car...

jtbshaw · 06-12-2009, 02:05 PM

Quote:

Originally Posted by Red Dragon

Blah, but I have no room for the car...

Keep it at Pat's.

need RX7 · 06-12-2009, 02:29 PM

Quote:

Originally Posted by nolimitind

Roy, how about you pay me $300 for the 5 lug setup with wheels and I give you the car????? This thing is going to the crusher by the end of the month if someone doesn't pick it up.....5 lug setup and everything.

If you were a little closer, I'd so do it. I wonder how the neighbors would like 3 red FCs in the driveway

jtbshaw · 06-16-2009, 11:42 AM

No one??? The clock is ticking....someone make an offer and come get this TII.......5 lug swap setup, TII diff and axles, good dash, full set of wheels and tires (either 5 spoke or TII wheels), etc...

Todd B.

Red Dragon · 06-16-2009, 01:57 PM

I would say phuck it but looks like I'll be picking up a new engine now.

jtbshaw · 06-18-2009, 04:34 PM

CAR IS SOLD!

Roy, contact SteveO if you want that 5 lug setup...he's getting the car.

Red Dragon · 06-18-2009, 08:47 PM

What? Cool I'll shoot him a pm over there on ars.

06-08-2009, 03:06 PM	#1
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	FS: 87 TII roller/project.... I picked this car up from Luis (Phil's builder in Attalla, AL) and had planned to build it for my son. We later found a very nice one to replace this one (thanks Phil and Bryan@BNR). It is a TII that still has the rear differential, axles, aluminum non-TII hood, front TII brakes and decent carpet/dash. It had a manual steering rack in it, but I pulled it to swap to my son's car. I will mount the power rack in this car so that it can be steered. Paint needs work, but overall not a bad body. The front driver's fender is off but I have a replacement, and no mirrors and no seats. I have the title in hand. What I don't have is a bunch of time. If you want it, $300 obo for the whole car and you can have it and the title. Please keep in mind, this will either be a parts car or a complete resto. This car will needs lots of work to put back on the road, but I hate to see it go to the crusher...which it will if no one buys it within the next few weeks. Todd B. 205-259-3145 **pics are from right after I pressure washed the car. It has been sitting in my spare lot since 11/08. Last edited by jtbshaw; 06-08-2009 at 07:01 PM.*

06-11-2009, 12:43 PM	#4
Red Dragon Rotary Enthusiast Join Date: Apr 2008 Location: Birmingham, AL Posts: 129 Rep Power: 18	Todd, how about selling me all the stuff I need for a 5-lug swap including wheels. That's if noone buys the car. I'd give you 300-400 for those alone. __________________ N/A 1987 RX7 (restoration coming along)

06-11-2009, 03:00 PM	#6
Red Dragon Rotary Enthusiast Join Date: Apr 2008 Location: Birmingham, AL Posts: 129 Rep Power: 18	Lol sorry __________________ N/A 1987 RX7 (restoration coming along)

06-16-2009, 01:57 PM	#13
Red Dragon Rotary Enthusiast Join Date: Apr 2008 Location: Birmingham, AL Posts: 129 Rep Power: 18	I would say phuck it but looks like I'll be picking up a new engine now. __________________ N/A 1987 RX7 (restoration coming along)

06-18-2009, 08:47 PM	#15
Red Dragon Rotary Enthusiast Join Date: Apr 2008 Location: Birmingham, AL Posts: 129 Rep Power: 18	What? Cool I'll shoot him a pm over there on ars. __________________ N/A 1987 RX7 (restoration coming along)

06-08-2009, 03:21 PM	#2
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	Oh, and the car is located in Pelham, AL...just South of Birmingham.

06-10-2009, 11:00 PM	#3
Mazdaracer4fun S4 INTO S5 Turbo II OWNER Join Date: Dec 2008 Location: Parma, Ohio 44130 Posts: 70 Rep Power: 17	omg if you were closer to ohio i would take that car in a heartbeat! .... any chance you would deliver? lol

06-12-2009, 10:11 AM	#7
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	Roy, how about you pay me $300 for the 5 lug setup with wheels and I give you the car????? This thing is going to the crusher by the end of the month if someone doesn't pick it up.....5 lug setup and everything.

06-12-2009, 10:12 AM	#8
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	I also have a set of TII wheel with rubber that I need to sale also. Rubber needs replacing but they hold air. $100 for the set!

06-16-2009, 11:42 AM	#12
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	No one??? The clock is ticking....someone make an offer and come get this TII.......5 lug swap setup, TII diff and axles, good dash, full set of wheels and tires (either 5 spoke or TII wheels), etc... Todd B.

06-18-2009, 04:34 PM	#14
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	CAR IS SOLD! Roy, contact SteveO if you want that 5 lug setup...he's getting the car.