TitaniumTT's I hope I make it to DGRR '09 Build - Page 20

***TitaniumTT*** · 07-12-2009, 10:23 PM

Quote:

Originally Posted by Turbo II Rotor

Was that an 044 you had? I'm going to run 2 of them external in the hatch.

Yup, one 044 in tank. MOUNT AND ISOLATE IT WELL!!!!!!!!

Quote:

Originally Posted by EJayCe996

Find out what pump he's running, its pretty quiet

Yeah that sounds about right

Turbo II Rotor · 07-12-2009, 11:06 PM

I made my own holders, it'll be done right.

***TitaniumTT*** · 07-13-2009, 06:05 AM

I buillt my own intank holder and ther simply wasn't enough room to pad the damn thing. With the padding it would've been too wide to fit into the tank without cutting the top piece out and rewelding a mounting flange on the top of the tank. Not my idea of fun.

What I might do over the winter is mount the Bosch externally under the car and use a -10 hardline from the tank to the bosch. A surge line if you will. Or maybe just mount a surge tank in the quarter well, or the tire well, I dunno. Still up in the air. I need to see what yours sound like when padded properly and finished.

***TitaniumTT*** · 07-13-2009, 08:01 PM

Pickin up Cryo'ed parts tomorrow - WOOT!

vex · 07-13-2009, 09:11 PM

Wow... that fuel pump would drive me absolutely nuts.... I would want to rip it out and break it.

***TitaniumTT*** · 07-13-2009, 09:54 PM

Quote:

Originally Posted by vex

Wow... that fuel pump would drive me absolutely nuts.... I would want to rip it out and break it.

Rip it out, hell fuck yeah. I don't know about breaking a $200 fuel pump though when they're pretty silent just sitting on the old workbench

vex · 07-13-2009, 11:16 PM

Quote:

Originally Posted by TitaniumTT

Rip it out, hell fuck yeah. I don't know about breaking a $200 fuel pump though when they're pretty silent just sitting on the old workbench

That noise destroys my calm to such a degree I would frankenstien it for the sole benefit of something awesome that can be used with better affect.... maybe a rotating assembly to bounce microwave radiation around the outside of the car causing radar interference. Maybe using it as a DC motor to control intake runner length... so many things to use a motor like that for besides driving me nuts!

MaczPayne · 07-14-2009, 10:29 AM

Wow, now that's noisy! Turn up the music

***TitaniumTT*** · 07-14-2009, 07:35 PM

boost is my music

Picked up the parts from Dave today...... mmmmmmmmmmm beautiful. Dave is the man, that is all. Grabbing a new feeler gauge tomorrow morning and with any luck will have a shortblock tomorrow night. WOOT! New fast acting thermo-probes (plural) ordered as well as a few misc parts needed.

pics to follow as always

Oh yeah, appt set with Dave for the first dyno session on this engine for Aug 1. We'll be running NS and WG again so looking for 310 - 320 RWHP. Engine #2 made 313 @ 7k. Then I'll start horsing around with the sequential stuff and datalogging a bunch of shite so by mid Aug we can up the boost, the revs, and shoot for 400.

WE3RX7 · 07-14-2009, 09:12 PM

I want to see 400... dont waste our time w/ that 310-320 bs

Seriously though, good news... cant wait to see the beast again...

***TitaniumTT*** · 07-14-2009, 11:34 PM

Meh, we figure we'll start off light

I figure 700-1000 miles of breakin, do the initial tune, capture some data and then go back and up the boost and revs when the engine is fully seated.

Parts!

EJayCe996 · 07-15-2009, 08:27 PM

Quote:

Originally Posted by TitaniumTT

ALAS! did you wince as you started?

***TitaniumTT*** · 07-15-2009, 10:04 PM

Yes

***TitaniumTT*** · 07-16-2009, 02:10 AM

Short block assembled - woo!

There should be daily updates for the next week or so............ probably right up until the dyno update

need RX7 · 07-16-2009, 02:45 AM

Damn son, that was fast.

07-13-2009, 06:05 AM	#288
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I buillt my own intank holder and ther simply wasn't enough room to pad the damn thing. With the padding it would've been too wide to fit into the tank without cutting the top piece out and rewelding a mounting flange on the top of the tank. Not my idea of fun. What I might do over the winter is mount the Bosch externally under the car and use a -10 hardline from the tank to the bosch. A surge line if you will. Or maybe just mount a surge tank in the quarter well, or the tire well, I dunno. Still up in the air. I need to see what yours sound like when padded properly and finished. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-13-2009, 08:01 PM	#289
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Pickin up Cryo'ed parts tomorrow - WOOT! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-13-2009, 09:11 PM	#290
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	Wow... that fuel pump would drive me absolutely nuts.... I would want to rip it out and break it. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

07-14-2009, 10:29 AM	#293
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	Wow, now that's noisy! Turn up the music __________________ Johnson TA FC in the works!

07-14-2009, 07:35 PM	#294
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	boost is my music Picked up the parts from Dave today...... mmmmmmmmmmm beautiful. Dave is the man, that is all. Grabbing a new feeler gauge tomorrow morning and with any luck will have a shortblock tomorrow night. WOOT! New fast acting thermo-probes (plural) ordered as well as a few misc parts needed. pics to follow as always Oh yeah, appt set with Dave for the first dyno session on this engine for Aug 1. We'll be running NS and WG again so looking for 310 - 320 RWHP. Engine #2 made 313 @ 7k. Then I'll start horsing around with the sequential stuff and datalogging a bunch of shite so by mid Aug we can up the boost, the revs, and shoot for 400. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-** Last edited by TitaniumTT; 07-14-2009 at 07:38 PM.

07-12-2009, 11:06 PM	#287
Turbo II Rotor Rotary Fan in Training Join Date: Nov 2008 Location: Aurora, CO Posts: 59 Rep Power: 17	I made my own holders, it'll be done right.

07-14-2009, 09:12 PM	#295
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I want to see 400... dont waste our time w/ that 310-320 bs Seriously though, good news... cant wait to see the beast again...

07-15-2009, 10:04 PM	#298
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yes __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-16-2009, 02:45 AM	#300
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	Damn son, that was fast. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.