Smoke from engine bay

bbade · 07-19-2009, 07:40 PM

I replaced the coolant hoses to the radiator when I installed the Koyo, but other than that everything is original unless Dave replaced some when he did the rebuild. I will have my father check the receipt for the rebuild as it is back home in PA and the car is in IN with me.

I did remove the UIM and TB several times last summer while I was working on polishing the UIM. I was pretty rushed the last time I put everything back together so there is a good possibility I did not get one of the hoses on correctly.

I will get the hose info and try to take a look at the car early this week so I can get back with an update, hopefully it's just a loose hose!

07-19-2009, 07:40 PM	#3
bbade Rotary Fanatic Join Date: Mar 2008 Location: Macungie, PA Posts: 163 Rep Power: 18	I replaced the coolant hoses to the radiator when I installed the Koyo, but other than that everything is original unless Dave replaced some when he did the rebuild. I will have my father check the receipt for the rebuild as it is back home in PA and the car is in IN with me. I did remove the UIM and TB several times last summer while I was working on polishing the UIM. I was pretty rushed the last time I put everything back together so there is a good possibility I did not get one of the hoses on correctly. I will get the hose info and try to take a look at the car early this week so I can get back with an update, hopefully it's just a loose hose! __________________ Proud owner of a base 1993 Montego Blue FD. PFC, RB single tip, Koyo Radiator, KDR rebuilt motor, polished OEM front strut bar, FEED replica sideskirts, OEM 99 spec rear spoiler, SuperPro Bushings Many thanks to Dave at KDR for sparking my rotor addiction.