Project86- My first (and probably not the last) Rebuild

project86 · 07-26-2009, 12:13 AM

Quote:

Originally Posted by FC3S Murray

Kyle,

I would consider just going a 60-1 route with stock ports. That is what my set up is close to and hell, that 6 months of research and tuning really paid off when it came time for full boost on my FC. Shit, you felt how strong that previous POS motor felt...that all had to do with my tune. Ultimately you could use some of my maps as a baseline(if you choose the Power FC) and I could assist you in buddy tuning. However, I have some great tuning resources and material that you need to read. the more you understanding these crucial fundementals, the easier troubleshooting and critical thinking become in relation to your tune and driveability.

PLUS I achieve full boost by 3200 rpm so lag is not bad by any means just in case you are reluctant with the single set-up.

Sean thanks alot my friend.. im not reluctant at all to be single turbo. im was very impressed with your power delivery and how strong it felt. so single turbo is lookin like a go for me right now. im gonna do some reading on the power FC and i already did some on the MoTeC M2R. IM likin their digital display set up too! BTW sean i changed my drive shaft and that eliminated the clunking i was gettin. it turns out after i pulled the old one off the front ujoint pretty much didnt move at all. i am however still getting some sort of screeching noise from undrerneath.....

project86 · 08-03-2009, 07:58 PM

Here are some pics of my car as it sits now. its been about a week since i have seen it going on two (damn 1hr drive and no days off).
Sean? your ports are pretty mild then im guessing? and your turbo is 60-1. Im still really thinkin about the PFC too cause i know i can get it for cheap. Hooray for r&d! What stuff do you have that i need to read?