GTUs 20B N/A Build Thread - Page 4

Christopher W. · 07-30-2009, 08:15 PM

Thanks, I really appreciate the compliments...

I updated over there, so I guess I need to here.

Logan is about to get my rotors back from CLR. Ha, it has taken over a year..

We hope to have the engine together this next month. It will go together first with the stock intake and closed PPs. At that point I will make the 12 hour trip to Ohio. I will get the car and drive for three days to rack up around 1000 miles. Then leave it at Defined until they get the new intake and ITBs happening.

When I pick it up this fall I want the tune to be glitch free and ready to roll.

So, more waiting but that is ok....It gives me more time to pay for it.

I did get a new Nardi Deep Corn 350mm steering wheel with Snap Off (Teqnik) quick release and Nardi hub. I also just bought new Defi control box and 60mm imperial water temp and oil temp gauges.

Next big purchase will be Alcon front and rear brakes...

Yea, I know, big brakes, especially rear, waste of money... If that is what you think then you completely miss the point of my car.

WE3RX7 · 07-30-2009, 10:08 PM

Sounds good man... I've watching this build like a hawk

Its good to set the FC bar so high... I'm just glad to see FC guys stepping up these days, we're too far and few between it seems.

fire85gslse · 07-31-2009, 09:34 PM

man, I cant stay away form this thread and your not posting updates quick enough for me to quit going back thru all the old post. Man this is a sick car! I have always dreamed of a 20B NA.
This exact car other than white exterior would be my dream! Or this motor in my white FC.

keep up the good work, looking for more post...........................................

Christopher W. · 08-01-2009, 06:17 AM

Yea, I remember when I was deciding whether to do a 13BT, LSX or 20B, I said I don't want to have my car sitting around in pieces waiting to get finished a year from now... Here we are almost two years later and still not done. Don't get me wrong, I am not complaining. I am very satisfied with the progress. I also believe in the abilities of Logan and Peter to get it done right.

***Herblenny*** · 08-26-2009, 09:18 AM

More pics please

Christopher W. · 03-21-2010, 12:49 PM

Forum isn't letting me post pictures. I click on links and they do nothing.

need RX7 · 03-21-2010, 03:48 PM

Incredible. I love that header :drool:

Gregory Casimir · 03-22-2010, 09:23 AM

nice build man
really loving the headers!

Christopher W. · 04-10-2010, 11:22 AM

Still would like to know why I am not able to post pictures...I thought that's what you wanted...

Pictures of new calipers on the other forum. Bling, Bling

Silver86 · 04-10-2010, 02:45 PM

Quote:

Originally Posted by Christopher W.

Still would like to know why I am not able to post pictures...I thought that's what you wanted...

Pictures of new calipers on the other forum. Bling, Bling

where do you have them hosted?

Christopher W. · 04-10-2010, 03:38 PM

Quote:

Originally Posted by Silver86

where do you have them hosted?

No, I mean when I click the Post Reply button it takes me to the page where you type your message. Above that big white box that you type in are the buttons for putting in the links, bold type, margins, it has a little white smiley face, a paper clip and all of that stuff. That whole blue border above the message area is totally unresponsive and has been that way for two months.

Silver86 · 04-10-2010, 03:54 PM

Quote:

Originally Posted by Christopher W.

No, I mean when I click the Post Reply button it takes me to the page where you type your message. Above that big white box that you type in are the buttons for putting in the links, bold type, margins, it has a little white smiley face, a paper clip and all of that stuff. That whole blue border above the message area is totally unresponsive and has been that way for two months.

thats strange... it works for me..

project86 · 04-12-2010, 03:07 PM

This build is pure inspiration. Show me more

FerociousP · 04-12-2010, 03:45 PM

somebody get this man's post poster working stat... I want to see engine pics!

Christopher W. · 04-12-2010, 05:12 PM

Actually, I would like to see engine pics myself. I have not seen my car in about a year...

I think it is going to finally get some attention in the next couple of months. I expect I will have it back and finished in June.

It is annoying to not be able to post pictures..

07-30-2009, 08:15 PM	#46
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Thanks, I really appreciate the compliments... I updated over there, so I guess I need to here. Logan is about to get my rotors back from CLR. Ha, it has taken over a year.. We hope to have the engine together this next month. It will go together first with the stock intake and closed PPs. At that point I will make the 12 hour trip to Ohio. I will get the car and drive for three days to rack up around 1000 miles. Then leave it at Defined until they get the new intake and ITBs happening. When I pick it up this fall I want the tune to be glitch free and ready to roll. So, more waiting but that is ok....It gives me more time to pay for it. I did get a new Nardi Deep Corn 350mm steering wheel with Snap Off (Teqnik) quick release and Nardi hub. I also just bought new Defi control box and 60mm imperial water temp and oil temp gauges. Next big purchase will be Alcon front and rear brakes... Yea, I know, big brakes, especially rear, waste of money... If that is what you think then you completely miss the point of my car. Last edited by Christopher W.; 07-31-2009 at 08:35 PM.

08-01-2009, 06:17 AM	#49
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Yea, I remember when I was deciding whether to do a 13BT, LSX or 20B, I said I don't want to have my car sitting around in pieces waiting to get finished a year from now... Here we are almost two years later and still not done. Don't get me wrong, I am not complaining. I am very satisfied with the progress. I also believe in the abilities of Logan and Peter to get it done right. Last edited by Christopher W.; 08-01-2009 at 12:19 PM.

08-26-2009, 09:18 AM	#50
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	More pics please __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-21-2010, 03:48 PM	#52
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	Incredible. I love that header :drool: __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

04-12-2010, 03:07 PM	#58
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	This build is pure inspiration. Show me more __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

07-30-2009, 10:08 PM	#47
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Sounds good man... I've watching this build like a hawk Its good to set the FC bar so high... I'm just glad to see FC guys stepping up these days, we're too far and few between it seems.

03-21-2010, 12:49 PM	#51
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Forum isn't letting me post pictures. I click on links and they do nothing.

03-22-2010, 09:23 AM	#53
Gregory Casimir Rotary Fanatic Join Date: Jan 2010 Posts: 253 Rep Power: 16	nice build man really loving the headers!

04-10-2010, 11:22 AM	#54
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Still would like to know why I am not able to post pictures...I thought that's what you wanted... Pictures of new calipers on the other forum. Bling, Bling

04-12-2010, 03:45 PM	#59
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	somebody get this man's post poster working stat... I want to see engine pics! __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

04-12-2010, 05:12 PM	#60
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	Actually, I would like to see engine pics myself. I have not seen my car in about a year... I think it is going to finally get some attention in the next couple of months. I expect I will have it back and finished in June. It is annoying to not be able to post pictures..