FC3S Murray's never ending build.

FC3S Murray · 08-17-2009, 02:39 AM

Well just fixed the front pulley e-shaft bolt oil leak. Had a buddy stop by(project 86) because he helped build it and he wanted to hear it pur and I ended up putting him to work.

I had him hold the clutch in while I removed the front pulley bolt to apply some rtv to the o-ring and copper washer face.

Started her up again about 1/2 hour later and ZERO white smoke and no oil spitting all over my engine bay. I am high off of gas fumes.

Need sleep......I must have spent an hour at least tonight dousching out the sand from my vag after the scare.

need RX7 · 08-17-2009, 03:38 AM

Sounds like a pretty scary situation. I'm glad it all worked out though

.

08-17-2009, 02:39 AM	#1
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Well just fixed the front pulley e-shaft bolt oil leak. Had a buddy stop by(project 86) because he helped build it and he wanted to hear it pur and I ended up putting him to work. I had him hold the clutch in while I removed the front pulley bolt to apply some rtv to the o-ring and copper washer face. Started her up again about 1/2 hour later and ZERO white smoke and no oil spitting all over my engine bay. I am high off of gas fumes. Need sleep......I must have spent an hour at least tonight dousching out the sand from my vag after the scare. __________________ Same pig, new soul Last edited by FC3S Murray; 08-17-2009 at 02:42 AM.

08-17-2009, 03:38 AM	#2
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	Sounds like a pretty scary situation. I'm glad it all worked out though . __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.