FC3S Murray's never ending build.

[TitaniumTT]

Accel enrichment, when you're cruising around at perfect Lambda and you hit the gas the in-rush of air requires more fuel than the map allows for. The ECU injects extra fuel and then backs it out over time. The Motec has
Accel Clamp - the max amount of addition fuel
Accel Clamp Comp - comp's the max amount based on a 3D table
Accel Decay - how fast it pulls the additional fuel out of the enrichment
Accel Enrichment Sensitivity - how much at a certain load vs rpm that it injects.
On top of that there is the Accel threshold - at which point (usually unit change/sec) does the ECU recognize that you are trying to accelerate and also various filters. I spent ALOT of time tonight and got the low rpm and VERY light tip ins pretty damn good. But what I ended up fucking up was the mash the gas tip in. Now she'll hit .65 L and buck like crazy. I ended up putting to much sensitivity in which worked for the higher throttle but did nothing for the light tips so I changed the threshold and got the lights great but the hard hits go too pig rich becuase now it's reacting much faster..... ah the joys. God bless the Motec software and the datalogging..... that shit is SICK