:driving: Turbo Boost Gauge readings

dudemaaan · 08-29-2009, 03:12 AM

Ignore what i said about 10 8 10 boost, thats for 3rd gen rx7's with sequential turbos. Didn't think about it being a 2nd gen. I wouldn't worry too much about vacuum provided you have good compression numbers. But stock ports usually pull over 16". My large street port pulls around 15" at 1000 rpm.

nvno1 · 08-31-2009, 09:24 AM

Quote:

Originally Posted by dudemaaan

Ignore what i said about 10 8 10 boost, thats for 3rd gen rx7's with sequential turbos. Didn't think about it being a 2nd gen. I wouldn't worry too much about vacuum provided you have good compression numbers. But stock ports usually pull over 16". My large street port pulls around 15" at 1000 rpm.

, Yeh i was still looking around and nothing seems very concrete on the matter on hand. I was just trying to see if there was a leak(still havent found any) and having low vac reading would state a vac leak right if the compression, fuel pressure and ignition is good right?

08-29-2009, 03:12 AM	#1
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	Ignore what i said about 10 8 10 boost, thats for 3rd gen rx7's with sequential turbos. Didn't think about it being a 2nd gen. I wouldn't worry too much about vacuum provided you have good compression numbers. But stock ports usually pull over 16". My large street port pulls around 15" at 1000 rpm. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!