New to the boards

MrVito · 03-18-2008, 06:37 PM

Hi everyone. I'm new to owning a rotary but not completely inexperienced. A few months ago I picked up an 89 TII at a steal of a price but with a lot of miles and a blown turbo. So about a week later I finished swapping in a JDM TII motorset and have been working out a few minor kinks here and there along with a few minor mods. Before this I was mostly into S-Chassis cars, and primarily SR and RB swaps. So uh, yeah, anyways, here's my baby.

Turbo II · 03-18-2008, 06:57 PM

Damn, nice car and welcome to the site!

KaiFD3S · 03-19-2008, 11:17 PM

Very nice FC

MotoTek · 03-20-2008, 12:09 AM

I smell drifter. Welcome!

MrVito · 03-21-2008, 10:14 AM

Quote:

Originally Posted by MotoTek

I smell drifter. Welcome!

I can't say I wouldn't like to learn, but my s13 and s14 were built for Auto-X, and the end goal for this car is the same as before, quick course times. THat, and I don't have the money to afford all those tires!

88rxn/a · 03-21-2008, 10:50 AM

wheels and tire size?

MrVito · 03-22-2008, 06:43 AM

just some cheap Enkei ZR-1 17x7.5, offset is either 38 or 40. only have 215's on there now. since lowering the car with Teins and tokico HP's, the stock meshies have been put back on because the Enkeis won't clear the new springs. 5.5mm spacers are on the way to clear up that prob though.

Ender · 03-22-2008, 09:57 PM

That IS a nice '7. It's good to see some rotary noobs joining up, too!

03-18-2008, 06:37 PM	#1
MrVito The Newbie Join Date: Mar 2008 Location: Augusta, GA Posts: 29 Rep Power: 0	New to the boards Hi everyone. I'm new to owning a rotary but not completely inexperienced. A few months ago I picked up an 89 TII at a steal of a price but with a lot of miles and a blown turbo. So about a week later I finished swapping in a JDM TII motorset and have been working out a few minor kinks here and there along with a few minor mods. Before this I was mostly into S-Chassis cars, and primarily SR and RB swaps. So uh, yeah, anyways, here's my baby.

03-18-2008, 06:57 PM	#2
Turbo II Zoom Freaking Zoom Join Date: Mar 2008 Location: NC Posts: 324 Rep Power: 18	Damn, nice car and welcome to the site! __________________ 1988 RX-7 Convertible 1991 RX-7 Turbo 2004 RX-8 GT 1985 RX-7 GSL - Sold

03-20-2008, 12:09 AM	#4
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA Posts: 302 Rep Power: 18	I smell drifter. Welcome! __________________ BLACKADDE™ \| ADGT RX7 \|

03-19-2008, 11:17 PM	#3
KaiFD3S Rotary Fanatic Join Date: Mar 2008 Posts: 437 Rep Power: 18	Very nice FC

03-21-2008, 10:50 AM	#6
88rxn/a The Newbie Join Date: Mar 2008 Posts: 21 Rep Power: 0	wheels and tire size?

03-22-2008, 06:43 AM	#7
MrVito The Newbie Join Date: Mar 2008 Location: Augusta, GA Posts: 29 Rep Power: 0	just some cheap Enkei ZR-1 17x7.5, offset is either 38 or 40. only have 215's on there now. since lowering the car with Teins and tokico HP's, the stock meshies have been put back on because the Enkeis won't clear the new springs. 5.5mm spacers are on the way to clear up that prob though.