auxiliary injection-who here has it?

dudemaaan · 09-11-2009, 08:45 PM

If i was to run 50/50 i would probably go with meth and water since it's easier to come by. The corrosive effects wouldnt be as bad with a mix, but i would still find a system thats meant for it. If i wanted to run alcohol anyway.
.
I don't rely on every small tweek to make power, if i can keep my air temps reasonable and knock down i use more boost to make the power. Over 500 hp with a reliable tune is good enough for me. I'm not going to chase after another 15 hp and reduce reliability.

09-11-2009, 08:45 PM	#1
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	If i was to run 50/50 i would probably go with meth and water since it's easier to come by. The corrosive effects wouldnt be as bad with a mix, but i would still find a system thats meant for it. If i wanted to run alcohol anyway. . I don't rely on every small tweek to make power, if i can keep my air temps reasonable and knock down i use more boost to make the power. Over 500 hp with a reliable tune is good enough for me. I'm not going to chase after another 15 hp and reduce reliability. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!