TitaniumTT's I hope I make it to DGRR '09 Build

mazdadude7 · 09-23-2009, 08:16 PM

I want you to find and prep me a fc roller...

***TitaniumTT*** · 09-23-2009, 11:27 PM

Quote:

Originally Posted by mazdadude7

I want you to find and prep me a fc roller...

I'll be PM'ing you shortly. I came up to get my laptop to run a comp test and change a few things in the MAP. I will be more than happy to do it for you. I would suggest though, unless it's going to be completely stock, to mock up everything first. Many things can easily change, for example, you may run a front mount and need to do some trimming. You may want to mount your reg somewhere on the shock tower and need to weld a few nuts to the backside so you can thread right in. Things like that CAN be done, but it's best to do them before paint. Just my thoughts. But seriously, I'd love to get a bunch of cars lined up so we can hit the ground running in Jan. I would love to prep a roller for you so lets chat over the next few days.

mazdadude7 · 09-25-2009, 09:31 PM

Quote:

Originally Posted by TitaniumTT

I'll be PM'ing you shortly. I came up to get my laptop to run a comp test and change a few things in the MAP. I will be more than happy to do it for you. I would suggest though, unless it's going to be completely stock, to mock up everything first. Many things can easily change, for example, you may run a front mount and need to do some trimming. You may want to mount your reg somewhere on the shock tower and need to weld a few nuts to the backside so you can thread right in. Things like that CAN be done, but it's best to do them before paint. Just my thoughts. But seriously, I'd love to get a bunch of cars lined up so we can hit the ground running in Jan. I would love to prep a roller for you so lets chat over the next few days.

looking forward to your pm

and your dyno run on youtube!!!

***TitaniumTT*** · 09-26-2009, 05:02 PM

Quote:

Originally Posted by MaczPayne

Wow! I'm expecting a huge-ass space underneath that curve!

It's damn linear for sure. The neat thing will be when we get the sequentials working and comparing the non-vs-seq torque/hp <4500. Dave overlaped an FD with my pulls and I'm giving up about 75rwhp below 4500

Quote:

Originally Posted by FC3S Murray

SWEET ASS SWEET Brian!! Get that vid up ASAP!!

Vids up!

Quote:

Originally Posted by mazdadude7

looking forward to your pm

and your dyno run on youtube!!!

Vids up, I'll be putting that PM together soon

09-23-2009, 08:16 PM	#1
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	I want you to find and prep me a fc roller...