A little refresh/save done my way! AND I LIKE PICS!!!

[proz07]

now some of you may have seen the Banzia racing 3rotor on the 7club well i finally saw an intercooler setup i liked and have decided to copy it somewhat. I already had a percision 750hp universal intercooler 24x10.5x3.5 and then went ahead and picked up a koyo N-flow from Works Connection for about 300 on sale very nice price for a very nice triple pass radiator

now im deploying next week and for some reason got it in my head to try and complete it before then soo.... i started moving the relay box to under the front core support worked out pretty nice although it is upside down i may turn it over once i get back but for now and the fact i dont drive in the rain i think itll be fine for now this way.

heres how iv mounted it as i know others may want to know how to move it out of the way. i know i did and couldnt find any real how to on it.



see its now flush allowing close install of the radiator.



And here is a few of how im mounting the intercooler like the greddy front mount only with endtank inlet outlets running right under the frame rails just around the koyo. this is my first intercooler modification so it could be better but itll work for now i think...i hope



radiator vertically mounted



under the car it is slightly lower than the intercooler but i can raise it if need be later but it wont be the first thing to hit if anything happens so not to worried about it.