FD3S RX-7 Engine Mounted Oil Catch Tank GB - Page 10

speedjunkie · 02-14-2012, 11:56 PM

^Good idea LOL!

silverfdturbo6port · 02-15-2012, 01:23 AM

Yea im in for sure for a vent tank. black line

Quote:

Originally Posted by afgmoto1978

Scrubolio and Jesse what color silicone vent line do you want? Blue, black or Red.

Chris RedR1 - Red
Astro - Black
AOC007 - Already have line, unless you need more. Also do you still want to use your existing vent line?
Rob - Custom

Silver if your serious about getting speak up. All the extra tanks will be getting blue line.

Fiercealien and Matt you will be getting clear hardline. Note I'm not sure what setup you will be running on oil metering pump side so you may need to come up with something custom on your end. Talk to Trout2 for advise, he's currently one of my premix tanks.

Adam

afgmoto1978 · 02-15-2012, 09:45 AM

Eric I will be having some engine mount plates made soon, would you like one? Thinking stainless.

xenocide0 · 02-15-2012, 02:51 PM

Quote:

Originally Posted by afgmoto1978

Fiercealien and Matt you will be getting clear hardline. Note I'm not sure what setup you will be running on oil metering pump side so you may need to come up with something custom on your end. Talk to Trout2 for advise, he's currently one of my premix tanks.
Adam

Yea, not sure what I will be doing yet either.

Quote:

Originally Posted by afgmoto1978

Also let me know if you have removed your stock Rats nest/coil mount framework from your motor.

still all stock, should I be doing this?

afgmoto1978 · 02-15-2012, 06:20 PM

Your fine Matt, you just need to relocate your vacuum chamber if your still running sequential twins.

speedjunkie · 02-16-2012, 01:57 AM

Quote:

Originally Posted by afgmoto1978

Eric I will be having some engine mount plates made soon, would you like one? Thinking stainless.

Yeah I'd probably pick up one of those. The one I made is fairly sturdy I think but I know I'd like yours better lol. How much?

afgmoto1978 · 02-16-2012, 04:15 PM

Okay, update, powder coating should be done by the time I get back in town next Thursday. I will be able to send the tanks out by Friday. Once I pay for the powder coating I split the cost five ways and each person a total $.

FierceAlien · 02-16-2012, 09:25 PM

Quote:

Originally Posted by afgmoto1978

Matt you will be getting clear hardline. Note I'm not sure what setup you will be running on oil metering pump side so you may need to come up with something custom on your end. Talk to Trout2 for advise, he's currently one of my premix tanks.

Adam

What do you mean about this? Im running the rotary aviation adapter plate for the OMP. I was just going to run a line from the tank into this adapter. Or is there more to the puzzle then this?

Thanks.

afgmoto1978 · 02-16-2012, 10:37 PM

Quote:

Originally Posted by FierceAlien

What do you mean about this? Im running the rotary aviation adapter plate for the OMP. I was just going to run a line from the tank into this adapter. Or is there more to the puzzle then this?

Thanks.

Well there are a couple options on oil injection. You have the rotary aviation setup and your good to go, what type of connect/adapter are you using? Or I can send you something that will work great. Is your rotary aviation adapter have a 1/4 NPT connection?

Note some people are modifying the stock unit to inject premix.

afgmoto1978 · 02-16-2012, 11:18 PM

Quote:

Originally Posted by speedjunkie

Yeah I'd probably pick up one of those. The one I made is fairly sturdy I think but I know I'd like yours better lol. How much?

Still waiting for a quote, I'll let you you guy know what it will be. I have a design that will work for the Xcessive LIM setup where the UIM is move forward a little bit. If your running the stock LIM let me know.

speedjunkie · 02-16-2012, 11:52 PM

^I am running the Xcessive LIM.

FierceAlien · 02-17-2012, 04:34 PM

Quote:

Originally Posted by afgmoto1978

Well there are a couple options on oil injection. You have the rotary aviation setup and your good to go, what type of connect/adapter are you using? Or I can send you something that will work great. Is your rotary aviation adapter have a 1/4 NPT connection?

Note some people are modifying the stock unit to inject premix.

I am not sure as to what nipple is on it. I did not measure it. I did not modify it when i picked it up. So what ever one comes with it from them, is what i have. If you can send/setup something that will make it s bit easier and nicer to connect, im all for it. I was just going to use a piece of hose from one to the other.

afgmoto1978 · 02-19-2012, 03:58 PM

It's a 1/4 NPT adaptor, I will send you something that will work great.

afgmoto1978 · 02-25-2012, 12:50 PM

Quote:

Originally Posted by afgmoto1978

Okay, update, powder coating should be done by the time I get back in town next Thursday. I will be able to send the tanks out by Friday. Once I pay for the powder coating I split the cost five ways and each person a total $.

Sorry guys wasn't able to pick the tanks up this week, I will pick them up either Monday or Tuesday depending on if I can get off work early enough.

I will be sending the UIM/catch tank mount design to be laser cut so if you want one speak up. Rob, Eric are on the list.

Prodigy · 02-25-2012, 04:40 PM

Quote:

Originally Posted by afgmoto1978

Note some people are modifying the stock unit to inject premix.

Sorry for derail, any more info on this, or a link... It's the first I've heard of it...

J.

02-16-2012, 04:15 PM	#142
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Okay, update, powder coating should be done by the time I get back in town next Thursday. I will be able to send the tanks out by Friday. Once I pay for the powder coating I split the cost five ways and each person a total $. Last edited by afgmoto1978; 02-16-2012 at 10:33 PM.

02-14-2012, 11:56 PM	#136
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	^Good idea LOL!

02-15-2012, 09:45 AM	#138
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Eric I will be having some engine mount plates made soon, would you like one? Thinking stainless.

02-15-2012, 06:20 PM	#140
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Your fine Matt, you just need to relocate your vacuum chamber if your still running sequential twins.

02-16-2012, 11:52 PM	#146
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	^I am running the Xcessive LIM.

02-19-2012, 03:58 PM	#148
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	It's a 1/4 NPT adaptor, I will send you something that will work great.