RXtacy's slooow build up - Page 19

Fendamonky · 07-22-2016, 06:05 AM

Quote:

Originally Posted by RXtacy

While the sub frame is out I've been working on refreshing the suspension/steering.

Installed poly PS, control arm, and sway bar bushings.

[IMG]

New ball joint boots.

[IMG]

New inner and outer tie rods, and new steering rack boots.

[IMG]

New adjustable sway bar end links, and sway bar mounts as well.

[IMG]

Still need to sand blast/paint the lower control arms and install the new bushings.

Sexy!!! I've always wanted to pull/blast/recoat the subframe and stuff... I'm jelly.

***TitaniumTT*** · 07-22-2016, 08:07 AM

Quote:

Originally Posted by RXtacy

While the sub frame is out I've been working on refreshing the suspension/steering.

Installed poly PS, control arm, and sway bar bushings.
New ball joint boots.
New inner and outer tie rods, and new steering rack boots.
New adjustable sway bar end links, and sway bar mounts as well.
Still need to sand blast/paint the lower control arms and install the new bushings.

Your arbor press has enough throat to do the arms? Nice!

Now when are you dropping the rear subframe?

Quote:

Originally Posted by hades

Well that made me wet

Quote:

Originally Posted by Fendamonky

Sexy!!! I've always wanted to pull/blast/recoat the subframe and stuff... I'm jelly.

No one wants to

Fendamonky · 07-22-2016, 08:11 AM

Quote:

Originally Posted by TitaniumTT

No one wants to

Well, I'd like to be able to appreciate the end results.. We'll put it that way

RXtacy · 07-22-2016, 09:12 AM

Quote:

Originally Posted by hades

Well that made me wet

Quote:

Originally Posted by Fendamonky

Sexy!!! I've always wanted to pull/blast/recoat the subframe and stuff... I'm jelly.

I wouldn't say it's fun, but the end results are nice.

Quote:

Originally Posted by TitaniumTT

Your arbor press has enough throat to do the arms? Nice!

Negative, but I made my vice work.

Quote:

Now when are you dropping the rear subframe?

I don't want to talk about it. I do have pillow balls and bushings that need to go in though

Quote:

No one wants to

This.

Quote:

Originally Posted by Fendamonky

Well, I'd like to be able to appreciate the end results.. We'll put it that way

More accurate

***TitaniumTT*** · 07-22-2016, 09:35 AM

Quote:

Originally Posted by RXtacy

Negative, but I made my vice work.

Quote:

Originally Posted by RXtacy

I don't want to talk about it. I do have pillow balls and bushings that need to go in though

Quote:

Originally Posted by RXtacy

More accurate

Much

RXtacy · 07-22-2016, 09:42 AM

Quote:

Originally Posted by TitaniumTT

Why you facepalming me fool?

***TitaniumTT*** · 07-22-2016, 10:00 AM

Moar parts going backwards

RXtacy · 07-22-2016, 10:25 AM

Quote:

Originally Posted by TitaniumTT

Moar parts going backwards

Ah true, but should be relatively minor. Don't have plans to drop the subframe, the diff bushings are already done. Just need to do the control arm bushings, and the pillow balls. I also have toe links and trailing arms on order, so we won't have to deal with those bushings.

***TitaniumTT*** · 07-22-2016, 10:46 AM

Ah, kewl.... was unsure how Treffeisenized you wanted to go with sandblasting and painting/powerdercoating the rear subframe

DON'T FORGET WHEEL LOCKS!

RXtacy · 07-22-2016, 10:50 AM

Quote:

Originally Posted by TitaniumTT

Ah, kewl.... was unsure how Treffeisenized you wanted to go with sandblasting and painting/powerdercoating the rear subframe

DON'T FORGET WHEEL LOCKS!

Yea I like the idea of dropping painting etc, but since no one will ever see it I'm not inclined to put in the effort if I'm honest

Would probably like to clean/paint the control arms though.

Word. Send me a text next week to remind me.

***TitaniumTT*** · 07-22-2016, 10:57 AM

Like I'm going to remember? Visegrip them bitches off!

RXtacy · 07-22-2016, 11:13 AM

Quote:

Originally Posted by TitaniumTT

Like I'm going to remember? Visegrip them bitches off!

If I even see you in the vicinity of my wheels with vice grips I'm going to punch you in the dick.

***TitaniumTT*** · 07-22-2016, 11:35 AM

Now we are getting kinky yeah?!?!?

I didn't say I was going to do it, I'm saying if you forget the wheel locks again, YOU'RE going the HAVE to do it

chibikougan · 07-22-2016, 03:11 PM

Just buy a smaller socket notch the locks and bang that lil socket on there take off wheel lock.

chibikougan · 07-22-2016, 03:12 PM

Or just weld a damn Nut on the end..

07-22-2016, 10:00 AM	#277
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Moar parts going backwards __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-22-2016, 10:46 AM	#279
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Ah, kewl.... was unsure how Treffeisenized you wanted to go with sandblasting and painting/powerdercoating the rear subframe *DON'T FORGET WHEEL LOCKS!* __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-22-2016, 10:57 AM	#281
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Like I'm going to remember? Visegrip them bitches off! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-22-2016, 11:35 AM	#283
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Now we are getting kinky yeah?!?!? I didn't say I was going to do it, I'm saying if you forget the wheel locks again, YOU'RE going the HAVE to do it __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**