need stock radio diagrams

mazdadude7 · 01-25-2010, 06:19 PM

My harness was cut and I have a stock radio. I want to test it before I go through all the trouble of repairing the harness, so does anyone have a diagram of the plug and where everything goes, thanks

Ender · 01-25-2010, 06:37 PM

The FSM has some helpful diagrams. It will be in 'body electrical'.
http://foxed.ca/foxed/index.php?page...nual#secondgen

RX_Spec · 01-26-2010, 10:16 AM

Constant 12V+ Blue/Red
Switched 12V+ Blue/White
Ground n/a
Illumination Red/Black
Dimmer n/a
Antenna Left Rear
Front Speakers 4" Dash
Left Front (+) Blue
Left Front (-) Blue/White
Right Front (+) Blue/Red
Right Front (-) Blue/Yellow
Rear Speakers 6 1/2" Side Panels
Left Rear (+) Blue/White
Left Rear (-) Blue/Green
Right Rear (+) Blue/Red
Right Rear (-) Blue/Green

There ya go full car radio side harness!

mazdadude7 · 01-26-2010, 09:58 PM

Thanks for all the help anyone have a picture of a plug I dont have one...

Ender · 01-26-2010, 11:49 PM

Quote:

Originally Posted by mazdadude7

Thanks for all the help anyone have a picture of a plug I dont have one...

The FSM shows the backsides of the units where the plugs go.

mazdadude7 · 01-27-2010, 05:50 PM

Thanks, I started to look @ the fsm but it failed to load so i didn't get to check it out yet. Thanks again though for the heads up

Ender · 01-28-2010, 08:08 PM

First chance you get it to load just save the whole thing so you'll have it in the future. I tried to use the link where I got my copy, but it was no longer in use otherwise I'd have given you that. If you have an S4 TII like I do send me your email address and I'll send you the FSM.

djmtsu · 01-28-2010, 09:08 PM

If it is an S5, you can get the factory style plugs off of MANY Mazda's from the 90's. My Millenia, Miata, and FC all used the same plugs. Some just had more pins than others.

mazdadude7 · 01-28-2010, 09:30 PM

Thanks dj! didnt even think of that.... I knew we kept you around for a reason.

I did test the radio and it powers up fine the bulbs are blown so Im going to be replacing them with leds

,my friend has all the bulbs already and likes to do that kinda stuff.

On a different note I am working on a metal stereo pannel to fit an aftermarket radio and 3 gauges or in my case one gauge and a turbo timer. I already have a protype mocked up just gotta make a real one. I will post pics of the cardboard mock up for a few laughs later.

djmtsu · 01-28-2010, 10:08 PM

Ready for me to blow your mind again

DDMworks makes what you are wanting to build for a NA (1st gen) Miata that should fit FC's as well.

mazdadude7 · 01-31-2010, 06:27 PM

My mind has been blown! your amazing!

http://www.ddmworks.com/miata/interi...surrounds.html

only thing is the mounting points are not correct

but they could be fixed pretty easy.

01-25-2010, 06:19 PM	#1
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	need stock radio diagrams My harness was cut and I have a stock radio. I want to test it before I go through all the trouble of repairing the harness, so does anyone have a diagram of the plug and where everything goes, thanks

01-26-2010, 10:16 AM	#3
RX_Spec Respect the Seven Join Date: Jan 2010 Location: Columbia, SC Posts: 10 Rep Power: 0	Constant 12V+ Blue/Red Switched 12V+ Blue/White Ground n/a Illumination Red/Black Dimmer n/a Antenna Left Rear Front Speakers 4" Dash Left Front (+) Blue Left Front (-) Blue/White Right Front (+) Blue/Red Right Front (-) Blue/Yellow Rear Speakers 6 1/2" Side Panels Left Rear (+) Blue/White Left Rear (-) Blue/Green Right Rear (+) Blue/Red Right Rear (-) Blue/Green There ya go full car radio side harness! __________________ 1990 GTU w/ near future Cosmo swap 2007 Chevy Cobalt Xbox360 GamerTag- RXSpec Learning a new Rotary issue everyday

01-28-2010, 09:08 PM	#8
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	If it is an S5, you can get the factory style plugs off of MANY Mazda's from the 90's. My Millenia, Miata, and FC all used the same plugs. Some just had more pins than others. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-28-2010, 10:08 PM	#10
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Ready for me to blow your mind again DDMworks makes what you are wanting to build for a NA (1st gen) Miata that should fit FC's as well. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-31-2010, 06:27 PM	#11
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	My mind has been blown! your amazing! http://www.ddmworks.com/miata/interi...surrounds.html only thing is the mounting points are not correct but they could be fixed pretty easy. Last edited by mazdadude7; 01-31-2010 at 06:32 PM. Reason: more info to add

01-26-2010, 09:58 PM	#4
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Thanks for all the help anyone have a picture of a plug I dont have one...

01-27-2010, 05:50 PM	#6
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Thanks, I started to look @ the fsm but it failed to load so i didn't get to check it out yet. Thanks again though for the heads up

01-28-2010, 09:30 PM	#9
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Thanks dj! didnt even think of that.... I knew we kept you around for a reason. I did test the radio and it powers up fine the bulbs are blown so Im going to be replacing them with leds ,my friend has all the bulbs already and likes to do that kinda stuff. On a different note I am working on a metal stereo pannel to fit an aftermarket radio and 3 gauges or in my case one gauge and a turbo timer. I already have a protype mocked up just gotta make a real one. I will post pics of the cardboard mock up for a few laughs later.