Febuary RHD Rotary Of The Month Voting

***ZGN*** · 02-17-2010, 03:19 AM

Voting is now open for Rotary of the month!
Good luck to all and thank you for participating.

Renesis NC
Location: Brisbane

Vehicle: [COLOR=darkgreen ! important]Mazda[/COLOR] 626 (CB2MS)
Year: 1982
Engine: Mazda [COLOR=darkgreen ! important]RX-7[/COLOR]Series V 13B Turbo
Turbo: Knightsports S320
Gearbox: Mazda RX-7 Series V
Differential: RX-7 Series II LSD
Brakes: Mazda RX-7 Series V Front & Rear
Brake Pads: Bendix Ultimate
Wheels: ROH ZS 16 x 7
Tyres Front: Yokohama A048R 195/50 R16
Tyres Rear: Toyo R888 225/40 R16
Exhaust: 3 inch dump through Cat with 2.5 inch rear section and custom mufflers
Engine Management: Factory - Reprogrammed
EFI Fuel Pump: Bosch 044
Boost Controller: Apexi AVC-R
Intercooler: Custom Air to Water

Exterior

Interior

Engine Bay

Vids
http://www.youtube.com/watch?v=GqqOF2o3_C0

http://www.youtube.com/watch?v=m-49u9luw0U

http://www.youtube.com/watch?v=_OrwYzAlfcY

---------------------------------------------------------------------
FIBREMAZ 13 BEEF
Location: Adelaide, Australia
'79 Aussie Delivered Rx7
13B PP motor 45mm ports
EFI harware 50mm throttle bodies,braided fuel lines, Malpassi fuel regulator
Microtech ECU
PWR ally radiator w/ Davies Craig thermo fan
FC front mounted oil cooler
Noltec adjustable strut tops, KYB shocks
Front coilovers with 350Lb Eibach springs Rear custom lowered springs approx 3.75" !!!
Whiteline swaybars F & R
S3 Front struts with FD calipers and FC slotted rotors ,braided brake lines

S3 LSD with slotted rotors
17" Lenso RS5 wheels with custom charcoal paint, Redwalls 205/40/17 F and 215/40/17 R
Respray and rust fixed Chrysler 300C

metallic Silver
Carbon Fibre bonnet/hood
Carbon Fibre wiper cowel panel
Carbon Fibre headlight lids
Carbon Fibre rear 1/4 vent covers
Carbon Fibre doortrims
Carbon Fibre centre console and gearstick surround
Custom nightglow guages 3 colour changable
Sparco reclinable seats
Momo Race steering wheel
Pencil shift gearknob
Some interior parts replaced with NOS items
NOS tail light lenses and gaskets
NOS front indicator lenses

More pics coming

================================================== ==

Madaz
Location: New Zealand
969 Bertone Mazda Luce RX87. Its in original unrestored condition apart from a partial repaint in the early 80's. It has a 13A engine with 87000 kms on the clock. These were Mazda's flagship in Japan back in 1969. I dont plan to modify it but one day when I have enough coin I would like to give it a full restoration.

It was lowered as you can see in the pics but its now back to its original height.

Lowered Height.

These more recent pics below are at original height.

Getting creative with the RX87 Badges

Interior

13A Engine with factory air con.

A 10 second vid.

http://www.youtube.com/watch?v=LxevtSihie8

-------------------------------------------------------------

sen2two
Location Unknown:
a piece of crap LHD GTU... then made it this. Wish is now my dialy driver. Most reliable car i have ever owned...

__________________

--------------------------------------

N3philum
Okinawa Japan

Vehicle: Mazda FD3s
Year: 2000
Engine: Mazda RX-7

Streetported 13BREW
Turbo: Garrett GT35r T3/.82 AR Exhaust housing
Gearbox: Stock 5 speed transmission
Differential: I was told it was a Mazdaspeed

1.5 way. Now I am finding that Mazdaspeed didn't make a 1.5 way so.. Who knows?
Brakes: BF Goodrich Stainless Steel Lines, Brembo

Front/Stoptech Rear Slotted rotors
Brake Pads

: EBC Yellowstuff
Wheels: 2000 FD3s Type RZ BBS 17x8 and 17x8.5
Tires Front: 245/45/17 Dunlop Direzza Z1 Starspecs
Tires Rear: 255/40/17 Potenza RE01-R
Exhaust: 3 inch custom downpipe to Borla submuffler/midpipe w/ Racing beat

dual catback.
Engine Management: Power FC -- Tuning will be done via Techedge Wideband and FC Datalogit.
EFI Fuel Pump: Walbro 255
Boost Controller: Hallman Pro Manual
Intercooler: Custom V-mount Greddy coupled with a Koyo Aluminum.

Exterior

Interior -- (My Camera Sucks!)

Engine Bay -- (Yep.. Still Sucks!)

I just posted the build thread. The link to it is here.
http://rotarycarclub.com/rotary_foru...001#post110001

---------------------------------

N.RotaryTech · 02-17-2010, 07:37 AM

Tough choice between the 626 an the luce.
Help me decide.

Madaz · 02-18-2010, 10:28 PM

626

Dazed and Rotarded · 02-21-2010, 12:23 AM

got my vote in .. 626 is killer

7aull · 02-23-2010, 04:49 AM

626 is brilliant-

but I must bow to an immaculate (and thankfully, unmolested) example of the rarest production mazda rotary coupe in the world, the R130 Luce RX87.

W-O-W!

Stu Aull
80 RX7 GS
Alaska

WE3RX7 · 02-23-2010, 06:57 AM

I had to go 626. I said I would and I'm I keep my word, and its a masterpiece for sure, lol...

HOWEVER - if that Luce doesnt win this one, it needs to be nominated again in a "class rotary" month and I'll definitely be down.

So many great cars this month. The cover of RCC's website will look soo much nicer in a few weeks

Whizbang · 02-23-2010, 11:46 AM

Bertone. Enough said. Its like trying to show up Ron Jeremy.

craig3x · 02-23-2010, 07:06 PM

Nice cars! Is there a category for conversions only? I may have a contestant next time.
http://www.youtube.com/watch?v=d0CUlLecxbo

djmtsu · 02-23-2010, 07:37 PM

Quote:

Originally Posted by craig3x

Nice cars! Is there a category for conversions only? I may have a contestant next time.
http://www.youtube.com/watch?v=d0CUlLecxbo

I don't think we have had a 'Rotary Conversion' vote yet, but it looks like we should.....soon!

prrex4ever · 02-23-2010, 08:53 PM

Awersome collection of RHD rides. Great to see all those rotaries that are not very common.

brycerxer · 02-26-2010, 05:21 PM

That GTU is gorgious -it should have more than two votes IMO.

sen2two · 02-26-2010, 06:59 PM

Quote:

Originally Posted by brycerxer

That GTU is gorgious -it should have more than two votes IMO.

thanks... your the man.

***ZGN*** · 03-02-2010, 12:01 PM

Congrats to Madaz's 1969 Bertone Mazda Luce RX87 winner of RHD of the month!

Click the link below for the winners thread!
February Rotary of the Month

View Poll Results: February RHD Rotary Of The Month Voting
Renesis NC's Mazda 626 13B Turbo	10	27.78%
FIBREMAZ 13 BEEF's 79 Aussie Delivered Rx7	2	5.56%
Madaz's 1969 Bertone Mazda Luce RX87	17	47.22%
Sen2two's LHD GTU Swapped to RHD	2	5.56%
N3philum's Mazda FD3s 2000	5	13.89%
Voters: 36. You may not vote on this poll

02-17-2010, 03:19 AM	#1
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	Febuary RHD Rotary Of The Month Voting Voting is now open for Rotary of the month! Good luck to all and thank you for participating. Renesis NC Location: Brisbane Vehicle: [COLOR=darkgreen ! important]Mazda[/COLOR] 626 (CB2MS) Year: 1982 Engine: Mazda [COLOR=darkgreen ! important]RX-7[/COLOR]Series V 13B Turbo Turbo: Knightsports S320 Gearbox: Mazda RX-7 Series V Differential: RX-7 Series II LSD Brakes: Mazda RX-7 Series V Front & Rear Brake Pads: Bendix Ultimate Wheels: ROH ZS 16 x 7 Tyres Front: Yokohama A048R 195/50 R16 Tyres Rear: Toyo R888 225/40 R16 Exhaust: 3 inch dump through Cat with 2.5 inch rear section and custom mufflers Engine Management: Factory - Reprogrammed EFI Fuel Pump: Bosch 044 Boost Controller: Apexi AVC-R Intercooler: Custom Air to Water Exterior Interior Engine Bay Vids http://www.youtube.com/watch?v=GqqOF2o3_C0 http://www.youtube.com/watch?v=m-49u9luw0U http://www.youtube.com/watch?v=_OrwYzAlfcY --------------------------------------------------------------------- FIBREMAZ 13 BEEF Location: Adelaide, Australia '79 Aussie Delivered Rx7 13B PP motor 45mm ports EFI harware 50mm throttle bodies,braided fuel lines, Malpassi fuel regulator Microtech ECU PWR ally radiator w/ Davies Craig thermo fan FC front mounted oil cooler Noltec adjustable strut tops, KYB shocks Front coilovers with 350Lb Eibach springs Rear custom lowered springs approx 3.75" !!! Whiteline swaybars F & R S3 Front struts with FD calipers and FC slotted rotors ,braided brake lines S3 LSD with slotted rotors 17" Lenso RS5 wheels with custom charcoal paint, Redwalls 205/40/17 F and 215/40/17 R Respray and rust fixed Chrysler 300C metallic Silver Carbon Fibre bonnet/hood Carbon Fibre wiper cowel panel Carbon Fibre headlight lids Carbon Fibre rear 1/4 vent covers Carbon Fibre doortrims Carbon Fibre centre console and gearstick surround Custom nightglow guages 3 colour changable Sparco reclinable seats Momo Race steering wheel Pencil shift gearknob Some interior parts replaced with NOS items NOS tail light lenses and gaskets NOS front indicator lenses More pics coming ================================================== == Madaz Location: New Zealand 969 Bertone Mazda Luce RX87. Its in original unrestored condition apart from a partial repaint in the early 80's. It has a 13A engine with 87000 kms on the clock. These were Mazda's flagship in Japan back in 1969. I dont plan to modify it but one day when I have enough coin I would like to give it a full restoration. It was lowered as you can see in the pics but its now back to its original height. Lowered Height. These more recent pics below are at original height. Getting creative with the RX87 Badges Interior 13A Engine with factory air con. A 10 second vid. http://www.youtube.com/watch?v=LxevtSihie8 ------------------------------------------------------------- sen2two Location Unknown: a piece of crap LHD GTU... then made it this. Wish is now my dialy driver. Most reliable car i have ever owned... __________________ -------------------------------------- N3philum Okinawa Japan Vehicle: Mazda FD3s Year: 2000 Engine: Mazda RX-7 Streetported 13BREW Turbo: Garrett GT35r T3/.82 AR Exhaust housing Gearbox: Stock 5 speed transmission Differential: I was told it was a Mazdaspeed 1.5 way. Now I am finding that Mazdaspeed didn't make a 1.5 way so.. Who knows? Brakes: BF Goodrich Stainless Steel Lines, Brembo Front/Stoptech Rear Slotted rotors Brake Pads: EBC Yellowstuff Wheels: 2000 FD3s Type RZ BBS 17x8 and 17x8.5 Tires Front: 245/45/17 Dunlop Direzza Z1 Starspecs Tires Rear: 255/40/17 Potenza RE01-R Exhaust: 3 inch custom downpipe to Borla submuffler/midpipe w/ Racing beat dual catback. Engine Management: Power FC -- Tuning will be done via Techedge Wideband and FC Datalogit. EFI Fuel Pump: Walbro 255 Boost Controller: Hallman Pro Manual Intercooler: Custom V-mount Greddy coupled with a Koyo Aluminum. Exterior Interior -- (My Camera Sucks!) Engine Bay -- (Yep.. Still Sucks!) I just posted the build thread. The link to it is here. http://rotarycarclub.com/rotary_foru...001#post110001 --------------------------------- __________________ Kevin

02-17-2010, 07:37 AM	#2
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC Posts: 552 Rep Power: 18	Tough choice between the 626 an the luce. Help me decide. __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.

02-21-2010, 12:23 AM	#4
Dazed and Rotarded douche bag Join Date: Feb 2010 Location: Hell Posts: 109 Rep Power: 16	got my vote in .. 626 is killer __________________ - chris xbox live - GraveConditions R.I.P paul gray - # 2

02-23-2010, 11:46 AM	#7
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	Bertone. Enough said. Its like trying to show up Ron Jeremy. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

02-18-2010, 10:28 PM	#3
Madaz Rotary Fan in Training Join Date: Jan 2009 Location: Burleigh Heads QLD Australia Posts: 56 Rep Power: 17	626

02-23-2010, 04:49 AM	#5
7aull The Newbie Join Date: Feb 2010 Posts: 2 Rep Power: 0	626 is brilliant- but I must bow to an immaculate (and thankfully, unmolested) example of the rarest production mazda rotary coupe in the world, the R130 Luce RX87. W-O-W! Stu Aull 80 RX7 GS Alaska

02-23-2010, 06:57 AM	#6
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I had to go 626. I said I would and I'm I keep my word, and its a masterpiece for sure, lol... HOWEVER - if that Luce doesnt win this one, it needs to be nominated again in a "class rotary" month and I'll definitely be down. So many great cars this month. The cover of RCC's website will look soo much nicer in a few weeks

02-23-2010, 07:06 PM	#8
craig3x Rotary Fan in Training Join Date: Feb 2010 Posts: 37 Rep Power: 0	Nice cars! Is there a category for conversions only? I may have a contestant next time. http://www.youtube.com/watch?v=d0CUlLecxbo

02-23-2010, 08:53 PM	#10
prrex4ever Rotary Fanatic Join Date: Oct 2008 Posts: 274 Rep Power: 17	Awersome collection of RHD rides. Great to see all those rotaries that are not very common.

02-26-2010, 05:21 PM	#11
brycerxer The Newbie Join Date: Oct 2008 Location: Phoenix, AZ Posts: 22 Rep Power: 0	That GTU is gorgious -it should have more than two votes IMO. __________________ *'85 RX-7 GSL-SE* Current Driver *'85 RX-7 GS* Current project *'84 RX-7* Parts car-SOLD *'91 RX-7 VERT* SOLD

03-02-2010, 12:01 PM	#13
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	Congrats to Madaz's 1969 Bertone Mazda Luce RX87 winner of RHD of the month! Click the link below for the winners thread! February Rotary of the Month __________________ Kevin Last edited by ZGN; 03-02-2010 at 12:28 PM.