Jdm 12at :) check it out...

mazdadude7 · 02-24-2008, 01:31 PM

I have what was going to be the powerplant for my 83 rx7 but it never happend. It is basicly complete It has a transmission, ecu, and i have wire diagrams to help set it up. I also have a hks Intercooler adapter that was made for a 12at, its been sandblasted so its just bare metal. I have found out alot about this motor so if you have any questions let me know. I have about $1600 in this and think its just as valueable now as it was when i bought it.

I have a Microtech ecu w/hand controler that can be included for a total of $2000

Pm me or call me @ (828) 342-7590

ask for pictures and I will post them in my photo bucket account http://s126.photobucket.com/albums/p111/mazdadude7/

1twistedrx7 · 02-24-2008, 08:57 PM

guys this is a nice motor i have personally seen this motor hell i was the one who installed it in the car . motor tuns great and good comp#s very clean!who ever get this jewel will be lucky! good luck BIG B

mazdadude7 · 02-24-2008, 09:33 PM

Thanks for the kind words

1twistedrx7 · 02-25-2008, 08:23 AM

you my friend are very welcome but just telling it how it is except the fact that my ass didn't spell (turns) right lol . call me later.

Nutsid · 02-27-2008, 04:18 PM

Good luck with the sell. If I hadn't already purchased far too much to do a custom turbo setup on my 12A I would be all over this.

fire85gslse · 03-01-2008, 08:35 PM

Quote:

Originally Posted by mazdadude7

pm me or call me @ (828) 342-7590
ask for pictures and I will post them in my photo bucket account http://s126.photobucket.com/albums/p111/mazdadude7/

Post pics here as well as location where you live since it is not in your avatar.

730RWHP12A · 03-02-2008, 11:22 AM

pics please

mazdadude7 · 03-03-2008, 07:34 AM

828 is nc I live in highlands. I am sorry for the delay in pictures but I have some now go ahead and check them out in my photobucket account, but dont be like kevin and stumble across something that you shouldnt have... I guess I need to figure out were you live, you know 2 much....

Jk! actually that was a school project for my sister in-law. She had to recreate a crime scene. so I got to kill my best friend in my kitchen. I think everyone should try it. The blood is hershey syrup btw. Thats why they are black and white.

730RWHP12A · 03-03-2008, 01:17 PM

Quote:

Originally Posted by RotaryResurrection

828 is west NC

Oh, and I dont see a single pic of an engine anywhere there. I did see some dead dude in your kitchen floor, though.

lol and i thought you were kidding

Nutsid · 04-08-2008, 02:35 AM

I know you've sent me pics of the engine before, unless of course you just scavenged them off of the internet.

djjjr42 · 04-16-2008, 11:30 AM

What do you mean by "basically complete"? What's missing or needed?

mazdadude7 · 04-18-2008, 01:20 AM

the cars missing....

djjjr42 · 04-26-2008, 05:03 PM

So why did it never happen? In the pics you show that it's mounted in the car but not totally hooked up. Why did you abandon the project? Do you know that it runs? Does it have an exhaust manifold?

mazdadude7 · 03-01-2009, 11:04 PM

Hi back!! sorry having a new son kept me busy. I am going to list this for sale again. I never finished the project b/c I was happy with the car I was putting it into I was going to do a full shell up build but changed projects.... anyway I want to sell the 12at motor, intake box lid, 12at computers(yes it has 2 ?) and an hks innercooler intake made for the 12at (sweet I know considering how rare a 12at is and I have aftermarket parts as well). The motor has been sitting for a long time and i never ran it so it is as is. I also have wire diagrams.

I have over 1800 in this setup but I am looking to get 1300. I will post pictures in my photobucket account soon

1twistedrx7 · 03-03-2009, 07:59 AM

i really hope you come to the dragon .keep it up brandon ! you with your petty threats using guys for conflict . you little internet worrior! please you know dam well you wont come see me in person and say this crap. you talk about me scamming but how abou t how you knew the whole time this it was me and came to my shop to do work? you knew i was being pasted as a scammer but you never told no one it was me .i did the rear main seal complete exhaust.egr and alot more and you ran off not paying your bill !no wonder your wife want to leave your ass you are punk and a coward . moved near the hotspot ? AND FOR THE RECORD HE CUTS ALOT OF CORNERS ON WORK SO I WOULD USE CAUTION WHEN BUYING THIS CAR !!!! oh ya when i looked over this motor it was locking up and this guy was going to put atf dam and i am a what ! you are trying to sell a messed up motor! guys man dont buy this motor i have seen this motor it has alot of problems!

02-24-2008, 01:31 PM	#1
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Jdm 12at :) check it out... I have what was going to be the powerplant for my 83 rx7 but it never happend. It is basicly complete It has a transmission, ecu, and i have wire diagrams to help set it up. I also have a hks Intercooler adapter that was made for a 12at, its been sandblasted so its just bare metal. I have found out alot about this motor so if you have any questions let me know. I have about $1600 in this and think its just as valueable now as it was when i bought it. I have a Microtech ecu w/hand controler that can be included for a total of $2000 Pm me or call me @ (828) 342-7590 ask for pictures and I will post them in my photo bucket account http://s126.photobucket.com/albums/p111/mazdadude7/

03-02-2008, 11:22 AM	#7
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	pics please __________________ rotaryshack.com

04-26-2008, 05:03 PM	#13
djjjr42 Rotary Fan in Training Join Date: Feb 2008 Location: Bishopville, SC Posts: 32 Rep Power: 0	So why did it never happen? In the pics you show that it's mounted in the car but not totally hooked up. Why did you abandon the project? Do you know that it runs? Does it have an exhaust manifold? Last edited by djjjr42; 04-26-2008 at 05:05 PM.

03-03-2009, 07:59 AM	#15
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	i really hope you come to the dragon .keep it up brandon ! you with your petty threats using guys for conflict . you little internet worrior! please you know dam well you wont come see me in person and say this crap. you talk about me scamming but how abou t how you knew the whole time this it was me and came to my shop to do work? you knew i was being pasted as a scammer but you never told no one it was me .i did the rear main seal complete exhaust.egr and alot more and you ran off not paying your bill !no wonder your wife want to leave your ass you are punk and a coward . moved near the hotspot ? AND FOR THE RECORD HE CUTS ALOT OF CORNERS ON WORK SO I WOULD USE CAUTION WHEN BUYING THIS CAR !!!! oh ya when i looked over this motor it was locking up and this guy was going to put atf dam and i am a what ! you are trying to sell a messed up motor! guys man dont buy this motor i have seen this motor it has alot of problems! __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

02-24-2008, 08:57 PM	#2
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	guys this is a nice motor i have personally seen this motor hell i was the one who installed it in the car . motor tuns great and good comp#s very clean!who ever get this jewel will be lucky! good luck BIG B

02-24-2008, 09:33 PM	#3
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Thanks for the kind words

02-25-2008, 08:23 AM	#4
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	you my friend are very welcome but just telling it how it is except the fact that my ass didn't spell (turns) right lol . call me later.

03-03-2008, 07:34 AM	#8
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	828 is nc I live in highlands. I am sorry for the delay in pictures but I have some now go ahead and check them out in my photobucket account, but dont be like kevin and stumble across something that you shouldnt have... I guess I need to figure out were you live, you know 2 much.... Jk! actually that was a school project for my sister in-law. She had to recreate a crime scene. so I got to kill my best friend in my kitchen. I think everyone should try it. The blood is hershey syrup btw. Thats why they are black and white.

04-16-2008, 11:30 AM	#11
djjjr42 Rotary Fan in Training Join Date: Feb 2008 Location: Bishopville, SC Posts: 32 Rep Power: 0	What do you mean by "basically complete"? What's missing or needed?

04-18-2008, 01:20 AM	#12
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	the cars missing....

03-01-2009, 11:04 PM	#14
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Hi back!! sorry having a new son kept me busy. I am going to list this for sale again. I never finished the project b/c I was happy with the car I was putting it into I was going to do a full shell up build but changed projects.... anyway I want to sell the 12at motor, intake box lid, 12at computers(yes it has 2 ?) and an hks innercooler intake made for the 12at (sweet I know considering how rare a 12at is and I have aftermarket parts as well). The motor has been sitting for a long time and i never ran it so it is as is. I also have wire diagrams. I have over 1800 in this setup but I am looking to get 1300. I will post pictures in my photobucket account soon