FS: Used Cusco OS front strut tower bar. Great Shape and shiney oohhhhhh :)

FC3S Murray · 02-22-2011, 12:06 AM

Hey guys,

This little beauty wont fit in my V8 swap so I need it gone. It sells for 190.00
http://www.enjukuracing.com/cusco-st...da-p-8799.html
.... so I will let it go for 115.00 shipped. It has minor wear since I have owned it since 2004 BUT really the only damage is the paint coming of the strut mount plate ends from the nuts being wrenched down from install and removal over the years. All-in-all good shape!

Paypal only.

PM me if you want it.

***TitaniumTT*** · 02-22-2011, 12:48 AM

keep the brace, put the rotary back in

FC3S Murray · 02-22-2011, 11:34 AM

What do you want from me? I went with a bdc porting and a bdc blow my shit up meth system. I should've listened to you TTT, maybe then my FC would still have a soul.... LSX's are reliable... but they still suck

btw.... I've got to get that vid and exhaust sleeves out to you before you need the sleeves for that 'vert build.

project86 · 02-22-2011, 12:59 PM

ouch^^ haha.. if this doesnt sell sean i may take it off your hands.

FC3S Murray · 02-22-2011, 01:09 PM

LOL..I figured that comment would sting

Let me now if you want it Kyle. I give you good price!

***TitaniumTT*** · 02-22-2011, 01:52 PM

What comment

FC3S Murray · 02-22-2011, 08:47 PM

LOL..you SOB

FC3S Murray · 02-23-2011, 08:05 PM

100.00 shipped!

FC3S Murray · 02-25-2011, 07:56 PM

sold

***TitaniumTT*** · 02-25-2011, 08:08 PM

Did you toss in the LS1 to sweeten the deal and finally get it gone?

02-22-2011, 12:06 AM	#1
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	FS: Used Cusco OS front strut tower bar. Great Shape and shiney oohhhhhh :) Hey guys, This little beauty wont fit in my V8 swap so I need it gone. It sells for 190.00 http://www.enjukuracing.com/cusco-st...da-p-8799.html .... so I will let it go for 115.00 shipped. It has minor wear since I have owned it since 2004 BUT really the only damage is the paint coming of the strut mount plate ends from the nuts being wrenched down from install and removal over the years. All-in-all good shape! Paypal only. PM me if you want it. __________________ Same pig, new soul Last edited by FC3S Murray; 02-22-2011 at 12:09 AM.

02-22-2011, 12:48 AM	#2
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	keep the brace, put the rotary back in __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-22-2011, 11:34 AM	#3
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	What do you want from me? I went with a bdc porting and a bdc blow my shit up meth system. I should've listened to you TTT, maybe then my FC would still have a soul.... LSX's are reliable... but they still suck btw.... I've got to get that vid and exhaust sleeves out to you before you need the sleeves for that 'vert build. __________________ Same pig, new soul Last edited by TitaniumTT; 02-22-2011 at 01:51 PM.

02-22-2011, 12:59 PM	#4
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	ouch^^ haha.. if this doesnt sell sean i may take it off your hands. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

02-22-2011, 01:09 PM	#5
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	LOL..I figured that comment would sting Let me now if you want it Kyle. I give you good price! __________________ Same pig, new soul

02-22-2011, 01:52 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	What comment __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-22-2011, 08:47 PM	#7
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	LOL..you SOB __________________ Same pig, new soul

02-23-2011, 08:05 PM	#8
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	*100.00 shipped!* __________________ Same pig, new soul

02-25-2011, 07:56 PM	#9
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	sold __________________ Same pig, new soul

02-25-2011, 08:08 PM	#10
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Did you toss in the LS1 to sweeten the deal and finally get it gone? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**