i want a 13B-RE

rxbrooks7 · 07-17-2011, 01:06 PM

well i want to put an RE in my FC but what all will i need to do such a swap i know banzai racing has the motor mounts to do it but will i be able to use my T2 trans will i need a new ECU can i use a PFC lol

WE3RX7 · 07-17-2011, 02:36 PM

You can use your trans. You'll need the appropriate clutch/flywheel/counterweight though.

You will need a better ECU. Standalone.

WankelsRevenge · 07-17-2011, 03:45 PM

Im thinking about getting this swap done as well. Unfortunatly I dont have the same contacts I used to. What are some good places that offer motors/rebuilds?
Ryan

rxbrooks7 · 07-17-2011, 04:43 PM

well i have sound everything other than the flywheel and clutch and counter weight any ideas

rxbrooks7 · 07-17-2011, 04:43 PM

found lol

***TitaniumTT*** · 07-17-2011, 08:29 PM

Quote:

Originally Posted by WankelsRevenge

Im thinking about getting this swap done as well. Unfortunatly I dont have the same contacts I used to. What are some good places that offer motors/rebuilds?
Ryan

Illicit Performance. Can do the entire swap for you as well.

FWIW I have the Banzai mounts, I wouldn't reccomend them, ever. Going to be probably building my own soon.

rxbrooks7 · 07-17-2011, 09:48 PM

well what would you charge me for a set of motor mounts lol

***TitaniumTT*** · 07-17-2011, 09:57 PM

I need your car, and your engine, and I'm not taking on any new projects until November unless I get my slate cleaned. PM Mazpower on this board about the rebuild though.

WankelsRevenge · 07-18-2011, 12:39 AM

Ill have to check em out. Ideally Id like to order one from a place and have them do a rebuild and a mild dtreet port on it. Im deffinatly gonna do some shopping around though to see what I can find.
Ryan

rxbrooks7 · 07-18-2011, 01:51 AM

well i told the guy with the RE that i want it so ill have time to work all my buggs out hope there wont be too many

07-17-2011, 01:06 PM	#1
rxbrooks7 The Newbie Join Date: Jun 2011 Posts: 14 Rep Power: 0	i want a 13B-RE well i want to put an RE in my FC but what all will i need to do such a swap i know banzai racing has the motor mounts to do it but will i be able to use my T2 trans will i need a new ECU can i use a PFC lol

07-17-2011, 09:57 PM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I need your car, and your engine, and I'm not taking on any new projects until November unless I get my slate cleaned. PM Mazpower on this board about the rebuild though. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-17-2011, 02:36 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	You can use your trans. You'll need the appropriate clutch/flywheel/counterweight though. You will need a better ECU. Standalone.

07-17-2011, 03:45 PM	#3
WankelsRevenge Rotary Fanatic Join Date: Jul 2011 Location: Jacksonville, FL Posts: 273 Rep Power: 14	Im thinking about getting this swap done as well. Unfortunatly I dont have the same contacts I used to. What are some good places that offer motors/rebuilds? Ryan

07-17-2011, 04:43 PM	#4
rxbrooks7 The Newbie Join Date: Jun 2011 Posts: 14 Rep Power: 0	well i have sound everything other than the flywheel and clutch and counter weight any ideas

07-17-2011, 09:48 PM	#7
rxbrooks7 The Newbie Join Date: Jun 2011 Posts: 14 Rep Power: 0	well what would you charge me for a set of motor mounts lol

07-18-2011, 12:39 AM	#9
WankelsRevenge Rotary Fanatic Join Date: Jul 2011 Location: Jacksonville, FL Posts: 273 Rep Power: 14	Ill have to check em out. Ideally Id like to order one from a place and have them do a rebuild and a mild dtreet port on it. Im deffinatly gonna do some shopping around though to see what I can find. Ryan

07-18-2011, 01:51 AM	#10
rxbrooks7 The Newbie Join Date: Jun 2011 Posts: 14 Rep Power: 0	well i told the guy with the RE that i want it so ill have time to work all my buggs out hope there wont be too many