FC3S Turbo II Diff, Hood, S5 Tail Lights, Black Interior...MORE

fuknc · 07-19-2011, 07:16 PM

**SHIPPING IS AT BUYERS EXPENSE**

**PM Me a Reasonable Offer**

Hinson Super Cars LS1/T56 to FC3S Mounting Kit (red) New Hinson Modified Clutch Line, and New Poly Engine/Trans Mounts (red) Only used for mock-up $300.00

Black Interior 1991 N/A - NO REAR SPEAKER COVERSDash, center console, seats, door panels (power), headliner (sunroof), sun visors, rear bins, front and rear carpets, front and rear plastics *If it has a match (R&L) I want to sell together* Make Reasonable Offer on parts wanted

RARE Black Rear Hatch Cover and Rear Speaker Covers $250.00

Momo Steering Wheel and Momo Hub $150.00

Re Amemiya driver and passenger mirrors $250.00

Turbo II Black Aluminum Hood $300

Turbo II Rear spoiler $100.00

S5 Round Tail Lights $275.00

S4 Turbo II LSD, NEW Atkins Rotary Diff Bushings pressed in, NEW Mazdatrix Comp front bushing, and NEW Maxdatrix comp stop washers. Have over $300 Just in Bushings, have receipts to prove it. $600

NEW Turbo II Axles, NEW, only installed...NEVER Driven. Have receipts $100

5% Tinted Windows Rear hatch and both side windows $150.00

91 N/A computer & wiring harness uncut $100.00

Pop-up headlight assemblys 50.00 (both)

S5 Fog lights with HIDS $150.00

S5 Clear front blinkers $50.00

S5 fenders $75.00 (both)

S5 door shells $100.00 (both)

Aluminum 5 lug Spare tire with aluminum Jack $50.00

Sunroof and motor $100.00

Power seat belt motors, driver side is NEW $100 (both)

Headlight motors $50 (both)

**I Do NOT Have ANY Engine or Transmission Parts**
**Body parts may have small dings and need paint, there painted satin black**
**Most all of the parts are still on my car**
**pictures upon request**
[/SIZE][/FONT][/SIZE]

***TitaniumTT*** · 07-19-2011, 09:33 PM

Quote:

Originally Posted by fuknc

NEW Turbo II Axles, NEW, only installed...NEVER Driven. Have receipts $100

Shipping quote on these to 06830. Where are you located?

This is your only post. Do you have a SN on the "other" forum for references?

fuknc · 07-20-2011, 01:08 AM

I sent you a PM

fuknc · 07-24-2011, 08:42 PM

Center vents sold

80leathersport · 07-24-2011, 09:38 PM

Do you still have the body harness that goes from the ecu to the coils

fuknc · 07-25-2011, 02:20 PM

Sent you a PM

jfaplanet · 07-25-2011, 11:14 PM

Replying for 80leathersport, the connectors I need are the body side connectors that connect to the engine harness right above the ecu. One is bright yellow and the other is almost orange. about 6 inches of wire and the connector is all I need. They are almost impossible to get to, but they supply power to the injectors thru the engine harness. I also need the coil connectors, body side about 6 inches of wire before the connector.

Before you cut them off, I can send you pictures of the corresponding connector to make sure they are the right ones.

Thanks, Charles

fuknc · 07-27-2011, 03:18 PM

PM sent

fuknc · 08-01-2011, 10:26 AM

Hinson Super Cars LS1/T56 to FC3S Mounting Kit

fuknc · 08-01-2011, 10:26 AM

SOLD Hinson Super Cars LS1/T56 to FC3S Mounting Kit SOLD

***TitaniumTT*** · 08-01-2011, 12:04 PM

I'll get that paypal to you tonight for those halfshafts, totally slipped my mind

fuknc · 08-01-2011, 09:39 PM

OK, Sounds good

fuknc · 08-03-2011, 09:13 AM

[[[bump]]]

Lots of parts left

fuknc · 08-03-2011, 11:08 PM

S5 Tail Lights Sold

jfaplanet · 08-05-2011, 12:28 PM

Can you check to see if you have the connectors above the ECU, All I need is a pigtail of the body side harness about 6" long. I also need the 3 connectors for the leading and trailing coils. Again, a pigtail is all I need.

Thanks, Charles

07-19-2011, 07:16 PM	#1
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	FC3S Turbo II Diff, Hood, S5 Tail Lights, Black Interior...MORE SHIPPING IS AT BUYERS EXPENSE PM Me a Reasonable Offer Hinson Super Cars LS1/T56 to FC3S Mounting Kit (red) New Hinson Modified Clutch Line, and New Poly Engine/Trans Mounts (red) Only used for mock-up $300.00 Black Interior 1991 N/A - NO REAR SPEAKER COVERSDash, center console, seats, door panels (power), headliner (sunroof), sun visors, rear bins, front and rear carpets, front and rear plastics If it has a match (R&L) I want to sell together Make Reasonable Offer on parts wanted RARE Black Rear Hatch Cover and Rear Speaker Covers $250.00 Momo Steering Wheel and Momo Hub $150.00 Re Amemiya driver and passenger mirrors $250.00 Turbo II Black Aluminum Hood $300 Turbo II Rear spoiler $100.00 S5 Round Tail Lights $275.00 S4 Turbo II LSD, NEW Atkins Rotary Diff Bushings pressed in, NEW Mazdatrix Comp front bushing, and NEW Maxdatrix comp stop washers. Have over $300 Just in Bushings, have receipts to prove it. $600 NEW Turbo II Axles, NEW, only installed...NEVER Driven. Have receipts $100 5% Tinted Windows Rear hatch and both side windows $150.00 91 N/A computer & wiring harness uncut $100.00 Pop-up headlight assemblys 50.00 (both) S5 Fog lights with HIDS $150.00 S5 Clear front blinkers $50.00 S5 fenders $75.00 (both) S5 door shells $100.00 (both) Aluminum 5 lug Spare tire with aluminum Jack $50.00 Sunroof and motor $100.00 Power seat belt motors, driver side is NEW $100 (both) Headlight motors $50 (both) I Do NOT Have ANY Engine or Transmission Parts Body parts may have small dings and need paint, there painted satin black Most all of the parts are still on my car pictures upon request [/SIZE][/FONT][/SIZE]

08-01-2011, 12:04 PM	#11
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I'll get that paypal to you tonight for those halfshafts, totally slipped my mind __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-20-2011, 01:08 AM	#3
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	I sent you a PM

07-24-2011, 08:42 PM	#4
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	Center vents sold

07-24-2011, 09:38 PM	#5
80leathersport The Newbie Join Date: Apr 2010 Location: Tennessee Posts: 28 Rep Power: 0	Do you still have the body harness that goes from the ecu to the coils

07-25-2011, 02:20 PM	#6
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	Sent you a PM

07-25-2011, 11:14 PM	#7
jfaplanet Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN Posts: 134 Rep Power: 18	Replying for 80leathersport, the connectors I need are the body side connectors that connect to the engine harness right above the ecu. One is bright yellow and the other is almost orange. about 6 inches of wire and the connector is all I need. They are almost impossible to get to, but they supply power to the injectors thru the engine harness. I also need the coil connectors, body side about 6 inches of wire before the connector. Before you cut them off, I can send you pictures of the corresponding connector to make sure they are the right ones. Thanks, Charles

07-27-2011, 03:18 PM	#8
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	PM sent

08-01-2011, 10:26 AM	#9
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	Hinson Super Cars LS1/T56 to FC3S Mounting Kit

08-01-2011, 09:39 PM	#12
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	OK, Sounds good

08-03-2011, 09:13 AM	#13
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	[[[bump]]] Lots of parts left

08-03-2011, 11:08 PM	#14
fuknc FC3S Join Date: Jul 2011 Location: 97007 Posts: 35 Rep Power: 0	S5 Tail Lights Sold

08-05-2011, 12:28 PM	#15
jfaplanet Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN Posts: 134 Rep Power: 18	Can you check to see if you have the connectors above the ECU, All I need is a pigtail of the body side harness about 6" long. I also need the 3 connectors for the leading and trailing coils. Again, a pigtail is all I need. Thanks, Charles