1988 Turbo II, rebuilt, $3500, NH

SleepeR1st · 01-23-2009, 06:43 AM

Feel free to go through my albums labeled "RX7" and "My Engine".

http://s143.photobucket.com/albums/r153/SleepeR1st/RX7/

Body has 109k miles, as you can see from the pictures it is extremely clean, and i know of only one rust spot on the car, which is a small spot on the sunroof. Underbody is very clean.

Engine is a Kevin Landers/Rotary Resurrection rebuild. Complete Mazda OEM rebuild kit, 2mm seals.
Has a large streetport done by Crackheadmel from the forums.

The Goods:
Rebuilt engine! Engine runs, has great oil pressure, havent checked compression.
Comes with all of the following but not installed, SAFCII, AEM Uego Wideband, Autometer Lite Boost/water temperature gauges in an A pillar gauge pod.
S5 turbo rebuilt by SHOWA, with an s5 manifold, never used it, but no shaft play, looks great.
Complete front brake setup, Frozen Rotors, rebuilt 4 piston front calipers, SS lines, Hawk HPS pads, less than 1k miles on them.
Racing Beat exhaust, downpipe, y pipe, mufflers, not the Rev II, original style.
Interior is very clean, no stains, no rips, just 1 cut in the center bin.

The Bad:
Exhaust could be tightened down to the wastegate a little more.
Idle issues that i can't figure out/don't have patience for figuring out.
Full emissions removal, no AC, no power steering (de-powered the right way), no BAC.
Needs tires? Lol

There's really not much bad things about this car. It's a perfect starter RX7 if you don't mind getting your hands a little dirty and figuring out some idle issues.

I payed $2800 for this car running very poorly before the rebuild. I spent the $900 on a rebuild kit to try and rebuild the engine myself. I pinched a water seal and didn't want to take the engine apart again, so i payed for another rebuild by Kevin Landers.
I have a lot of money invested in this car for almost no satisfaction on my part, i have not driven it yet.

sickofpistons · 01-25-2009, 07:18 PM

Would you be interested in any type of trades? Is there any issues with the turbo?

01-23-2009, 06:43 AM	#1
SleepeR1st The Newbie Join Date: Jun 2008 Posts: 9 Rep Power: 0	1988 Turbo II, rebuilt, $3500, NH Feel free to go through my albums labeled "RX7" and "My Engine". http://s143.photobucket.com/albums/r153/SleepeR1st/RX7/ Body has 109k miles, as you can see from the pictures it is extremely clean, and i know of only one rust spot on the car, which is a small spot on the sunroof. Underbody is very clean. Engine is a Kevin Landers/Rotary Resurrection rebuild. Complete Mazda OEM rebuild kit, 2mm seals. Has a large streetport done by Crackheadmel from the forums. The Goods: Rebuilt engine! Engine runs, has great oil pressure, havent checked compression. Comes with all of the following but not installed, SAFCII, AEM Uego Wideband, Autometer Lite Boost/water temperature gauges in an A pillar gauge pod. S5 turbo rebuilt by SHOWA, with an s5 manifold, never used it, but no shaft play, looks great. Complete front brake setup, Frozen Rotors, rebuilt 4 piston front calipers, SS lines, Hawk HPS pads, less than 1k miles on them. Racing Beat exhaust, downpipe, y pipe, mufflers, not the Rev II, original style. Interior is very clean, no stains, no rips, just 1 cut in the center bin. The Bad: Exhaust could be tightened down to the wastegate a little more. Idle issues that i can't figure out/don't have patience for figuring out. Full emissions removal, no AC, no power steering (de-powered the right way), no BAC. Needs tires? Lol There's really not much bad things about this car. It's a perfect starter RX7 if you don't mind getting your hands a little dirty and figuring out some idle issues. I payed $2800 for this car running very poorly before the rebuild. I spent the $900 on a rebuild kit to try and rebuild the engine myself. I pinched a water seal and didn't want to take the engine apart again, so i payed for another rebuild by Kevin Landers. I have a lot of money invested in this car for almost no satisfaction on my part, i have not driven it yet.

01-25-2009, 07:18 PM	#2
sickofpistons Rotary Fan in Training Join Date: Sep 2008 Location: Jackson, TN Posts: 72 Rep Power: 0	Would you be interested in any type of trades? Is there any issues with the turbo?