|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
04-07-2009, 07:10 AM
|
#1 |
|
Sigh.....
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 2,377
Rep Power: 20  |
Hose routing questions : charcoal canister/purge valve
I put my charcoal canister back on (why not?) and want to make sure I'm getting the routing correct. I'm running the nipple coming off the block straight to the charcoal canister (PIC1 and PIC2). This will work fine?
Also, there's a nipple coming off the oil filler neck (PIC1). If I'm reading the diagram correctly it, in stock form, goes to the purge valve which then goes to vacuum. As such, can I just route it straight to a vacuum source (PIC3) since I'm not sure if I have a purge valve lying around? If I do have a purge valve, the 2 vacuum tubes coming from the purge valve go to the nipples on the front of the UIM? Thanks... 
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
|
|
| Bookmarks |
|
|
Threaded Mode