|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
The Newbie
Join Date: Apr 2009
Posts: 8
Rep Power: 0 ![]() |
manifold??
OK so here is what happened first of all i drive a S4 87 turbo II and i had bought it a Racing beat downpipe 2.5 for it. My cousin and I went to install it on the 7 when he noticed my manifold was cracked
![]() |
![]() |
![]() |
![]() |
#2 |
Rotary Fanatic
Join Date: Apr 2008
Posts: 182
Rep Power: 0 ![]() |
You can still use your RB DP, but I would suggest getting a good condition stock manifold or just bite the bullet and get a full S5 turbo swap. I did the swap and I'll never look back.
By swap I mean get the S5 turbo and manifold. Spools better, less clutter, easier to remove if you ever need to. |
![]() |
![]() |
![]() |
#3 |
The Newbie
Join Date: Apr 2009
Posts: 8
Rep Power: 0 ![]() |
Thank you guess ill start hunting down a S5 swap.
|
![]() |
![]() |
![]() |
#4 |
Rotary Fanatic
Join Date: Apr 2008
Posts: 182
Rep Power: 0 ![]() |
Should be able to score one relatively cheap.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|