December Rotary Race Car of the Month Voting

***ZGN*** · 12-13-2009, 04:50 PM

Chadwick's RX-7 From Smyrna, TN, USA

1993 Brilliant Black Base RX7.
Engine and drive train and suspension
13B-REW
Rx8 eccentric shaft
9.7:1 rotors (89-91 NA) balanced and lightened
Rx8 front and rear Stationary gears and bearings
13B-REW front and rear counter weights
Balanced and clearance for 9k+ rpm
Ported intake and exhaust without changing timing
Port matched intake runners
Xccessive Manufacturing lower intake manifold
JDM upper intake manifold
Oil and Water mods
Re-medy water pump
550cc primary injectors
1680cc secondary injectors (RX7-Store fuel rail)
Garfinkle Oil pan brace
Smurf engine mounts
Mazdaspeed power plant frame
Tweakit Racing Intercooler and Duct
FJO injector driver
FuelLab 525 Series FPR
SR Motorsports wide belt underdrive pulley kit
99 spec twin turbo /w ported wastegate
R1 duel Oil Coolers
Tweakit Racing Idler Pulley
HKS Twin Fire
Magnacor 10mm Race wires
Koni Sport custom valued and converted to double adjustable.
800lbs front, 560lbs rear springs
Nagisa Auto Upper Control arms
RP Trailing arms
RP toe links
Unotainium bushings
4.77 Knightsport ring and pinion
Kaaz 1.5 LSD
Fuel tank surge cover
Axiom harness bar
RP Nippondenso Fuel pump
Widefoot Swaybar mounts
M2 Carbon Fiber CAI
Mazdacomp radiator

Body
99 front bumper
99 bumper reinforcement 99 undertray
99 brake ducts
99 air guide
99 combination lights
99 front chin spoiler
99 rear tail lights
RE replica oil cooler ducts
Feed replica side skirts
Tweakit Racing Custom Front Splitter
Mazdaspeed replica hood
APR GT 2 custom 2 element wing /mounted using stock R1 holes
Flying “M” badges front and rear

Interior
Corbeau Forza w/ dual lock slider (Driver)
Corbeau Clubman /stock rail (passenger)
Lilliput in dash Carputer
Lilliput 7” retractable in dash touch LCD
Tripower gauge pod
LC1 wideband w/ XD-16 gauge
Pineapple Dual EGT gauge
Pettit column mount boost gauge

-----------------------------------------------------------------------------

The PartsGroups RX8 SCCA ITR & NASA PTD Race Car

This car was built this year and has had several wins in SCCA & NASA racing events. It just won overall in the 2009 American Road Race of Champions 3 Hour Enduro at Road Atlanta and is 1st in class in SE NASA PTD. The classes I race this car limit what you can and can not do.

Here is a quick list of some mod's:

Custom radiator
custom water pump
custom intake for racing with SCCA
rem coated 5:12 ring & pinion
aluminum clutch
ecu tuning
custom roll cage
fuel tank mods to eliminate fuel starvation
required safety equipment
AEM dash,blueprinted injectors
custom fuel rail
custom made shifter bushings
KONI custom shocks
custom sway bars
custom exhaust headers for SCCA
custom exhaust
sunroof roof panel removed and replaced with non sunroof panel
17x8.5 Enkei RPF1,Hoosier R6 Tires in various sizes

---------------------------------------------------------------------

Sarah @ BMIRacing's 4 Rotor RX-8

2009 Mazda RX8 4 Rotor

Engine and Accessories
Naturally Aspirated Peripheral Port 4 Rotor
NRS 2 piece 2mm Ceramic Seals
Mazda Dry Sump Front Cover
4 x 1200cc RC Injectors
Fuel rail supplied by RC Injectors
Slide Throttle
K&N Air Filters
Custom Carbon Fiber Air Box
Haltech Sport 2000
Racepak IQ3 Data Logging Dash
Griffin Radiator with oil heat exchanger
2 x Davies Craig Electric Water Pumps
2 x Davies Craig 16" Electric Fans
2 x Davies Craig 12" Electric Fans
Burns Stainless Headers, 4 into 1 Collector, Transition and boom tube
2 x Bosch Motorsport Fuel Pumps
Fragola Performance Systems - Fittings and hose for the Oiling System and Fuel System
Hose Techniques - Intake System, and cooling system
Pure Power Lubricants and Stainless Steel Filters

Drive Train
Tilton triple plate carbon carbon clutch
Tilton Flywheel
Tilton Bell housing
Tilton Super Starter
4 Speed EMCO Transmission
ACPT Custom Carbon Fiber Drive Shaft
1 1/2 way Tomei Limited Slip Differential

Accessories
Progress Auto front and rear sway bars
Fragola Performance System Brake Lines
Disc Brakes Australia brake rotors front and rear
Brembo Brake Calipers
Tilton 600 Series Pedal Assembly
Tilton remote adjustable brake bias
MOMO Steering wheel
MOMO WTCC Quick release hub
MOMO Safari Racing Seat
MOMO 6 point Safety Harness
Lexan Windows
8 Point Roll cage
AIT Racing Carbon Fiber Hood
AIT Racing Carbon Fiber Doors
AIT Racing Carbon Fiber Trunk
AIT Racing Carbon Fiber Roof
AIT Racing Carbon Fiber interior panels
APR Performance GTC-500 Adjustable Rear Wing
APR Performance Rear Diffuser
APR Performance Front Splitter
Odyssey Battery - Extreme Racing 30
3 x GoPro Motorsports Hero Wide Angel Camera

--------------------------------------------------------

MIKES'8 · 12-13-2009, 11:00 PM

that 4 rotor is sick seen it at 7stock!

85rx-7gsl-se · 12-13-2009, 11:28 PM

Had to vote for this years Solo National SSM Champ Dan Chadwick.

Monster_FC3S · 12-14-2009, 11:07 PM

BMIRacing's 4-rotor FTW! But still a hard1 Chadwick's is sick to (Would love to see one of them at the next deals gap meet!! woot woot)

djmtsu · 12-15-2009, 07:54 AM

Quote:

Originally Posted by Monster_FC3S

BMIRacing's 4-rotor FTW! But still a hard1 Chadwick's is sick to (Would love to see one of them at the next deals gap meet!! woot woot)

Chadwick's was at DGRR last year. I believe he will be back this year.

prrex4ever · 12-15-2009, 07:06 PM

Another tough decision. Luv the 4 rotor but.......!

Chadwick · 12-15-2009, 07:27 PM

Quote:

Originally Posted by djmtsu

Chadwick's was at DGRR last year. I believe he will be back this year.

Yep, Tweakit Racing is sponsoring DGRR again so we will be there!!

Monster_FC3S · 12-15-2009, 10:12 PM

Quote:

Originally Posted by Chadwick

Yep, Tweakit Racing is sponsoring DGRR again so we will be there!!

cool see you guys there!

Brent · 12-15-2009, 11:01 PM

Quote:

Originally Posted by Chadwick

Yep, Tweakit Racing is sponsoring DGRR again so we will be there!!

Look for the guys with the huge wings! There may also be another TweakIt car there

Voted for Dan as well. All very nice cars this month and I love seeing this race car rotary month.

Pourman · 12-21-2009, 04:08 PM

DANG that 4-Rotor sounds sick !!

fc nut · 12-22-2009, 08:25 PM

that thing is music to my ears. it's sweeet!

RotorDad · 12-23-2009, 03:49 PM

Gotta love the 4 rotor!!!

***ZGN*** · 12-28-2009, 10:01 AM

Only a few more days left to get your vote in! It's a close race between the FD and the RX-8

Bryan@BNR · 12-30-2009, 10:38 AM

Is BMI a member on this forum? I know chadwick is so I voted for him.

***ZGN*** · 12-30-2009, 11:02 AM

Quote:

Originally Posted by Bryan@BNR

Is BMI a member on this forum? I know chadwick is so I voted for him.

Yep, they are!

BMIRacing

http://www.rotarycarclub.com/rotary_...ight=BMIRacing

View Poll Results: December Rotary Race Car Of The Month!
Chadwick's RX-7	29	43.28%
The PartsGroups RX-8	6	8.96%
Sarah/BMIRacing 4 Rotor RX-8	32	47.76%
Voters: 67. You may not vote on this poll

12-13-2009, 04:50 PM	#1
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	December Rotary Race Car of the Month Voting Chadwick's RX-7 From Smyrna, TN, USA 1993 Brilliant Black Base RX7. Engine and drive train and suspension 13B-REW Rx8 eccentric shaft 9.7:1 rotors (89-91 NA) balanced and lightened Rx8 front and rear Stationary gears and bearings 13B-REW front and rear counter weights Balanced and clearance for 9k+ rpm Ported intake and exhaust without changing timing Port matched intake runners Xccessive Manufacturing lower intake manifold JDM upper intake manifold Oil and Water mods Re-medy water pump 550cc primary injectors 1680cc secondary injectors (RX7-Store fuel rail) Garfinkle Oil pan brace Smurf engine mounts Mazdaspeed power plant frame Tweakit Racing Intercooler and Duct FJO injector driver FuelLab 525 Series FPR SR Motorsports wide belt underdrive pulley kit 99 spec twin turbo /w ported wastegate R1 duel Oil Coolers Tweakit Racing Idler Pulley HKS Twin Fire Magnacor 10mm Race wires Koni Sport custom valued and converted to double adjustable. 800lbs front, 560lbs rear springs Nagisa Auto Upper Control arms RP Trailing arms RP toe links Unotainium bushings 4.77 Knightsport ring and pinion Kaaz 1.5 LSD Fuel tank surge cover Axiom harness bar RP Nippondenso Fuel pump Widefoot Swaybar mounts M2 Carbon Fiber CAI Mazdacomp radiator Body 99 front bumper 99 bumper reinforcement 99 undertray 99 brake ducts 99 air guide 99 combination lights 99 front chin spoiler 99 rear tail lights RE replica oil cooler ducts Feed replica side skirts Tweakit Racing Custom Front Splitter Mazdaspeed replica hood APR GT 2 custom 2 element wing /mounted using stock R1 holes Flying “M” badges front and rear Interior Corbeau Forza w/ dual lock slider (Driver) Corbeau Clubman /stock rail (passenger) Lilliput in dash Carputer Lilliput 7” retractable in dash touch LCD Tripower gauge pod LC1 wideband w/ XD-16 gauge Pineapple Dual EGT gauge Pettit column mount boost gauge ----------------------------------------------------------------------------- The PartsGroups RX8 SCCA ITR & NASA PTD Race Car This car was built this year and has had several wins in SCCA & NASA racing events. It just won overall in the 2009 American Road Race of Champions 3 Hour Enduro at Road Atlanta and is 1st in class in SE NASA PTD. The classes I race this car limit what you can and can not do. Here is a quick list of some mod's: Custom radiator custom water pump custom intake for racing with SCCA rem coated 5:12 ring & pinion aluminum clutch ecu tuning custom roll cage fuel tank mods to eliminate fuel starvation required safety equipment AEM dash,blueprinted injectors custom fuel rail custom made shifter bushings KONI custom shocks custom sway bars custom exhaust headers for SCCA custom exhaust sunroof roof panel removed and replaced with non sunroof panel 17x8.5 Enkei RPF1,Hoosier R6 Tires in various sizes --------------------------------------------------------------------- Sarah @ BMIRacing's 4 Rotor RX-8 2009 Mazda RX8 4 Rotor Engine and Accessories Naturally Aspirated Peripheral Port 4 Rotor NRS 2 piece 2mm Ceramic Seals Mazda Dry Sump Front Cover 4 x 1200cc RC Injectors Fuel rail supplied by RC Injectors Slide Throttle K&N Air Filters Custom Carbon Fiber Air Box Haltech Sport 2000 Racepak IQ3 Data Logging Dash Griffin Radiator with oil heat exchanger 2 x Davies Craig Electric Water Pumps 2 x Davies Craig 16" Electric Fans 2 x Davies Craig 12" Electric Fans Burns Stainless Headers, 4 into 1 Collector, Transition and boom tube 2 x Bosch Motorsport Fuel Pumps Fragola Performance Systems - Fittings and hose for the Oiling System and Fuel System Hose Techniques - Intake System, and cooling system Pure Power Lubricants and Stainless Steel Filters Drive Train Tilton triple plate carbon carbon clutch Tilton Flywheel Tilton Bell housing Tilton Super Starter 4 Speed EMCO Transmission ACPT Custom Carbon Fiber Drive Shaft 1 1/2 way Tomei Limited Slip Differential Accessories Progress Auto front and rear sway bars Fragola Performance System Brake Lines Disc Brakes Australia brake rotors front and rear Brembo Brake Calipers Tilton 600 Series Pedal Assembly Tilton remote adjustable brake bias MOMO Steering wheel MOMO WTCC Quick release hub MOMO Safari Racing Seat MOMO 6 point Safety Harness Lexan Windows 8 Point Roll cage AIT Racing Carbon Fiber Hood AIT Racing Carbon Fiber Doors AIT Racing Carbon Fiber Trunk AIT Racing Carbon Fiber Roof AIT Racing Carbon Fiber interior panels APR Performance GTC-500 Adjustable Rear Wing APR Performance Rear Diffuser APR Performance Front Splitter Odyssey Battery - Extreme Racing 30 3 x GoPro Motorsports Hero Wide Angel Camera -------------------------------------------------------- __________________ Kevin Last edited by ZGN; 12-14-2009 at 10:48 AM.

12-13-2009, 11:00 PM	#2
MIKES'8 The Newbie Join Date: Nov 2009 Location: SF to LV Posts: 20 Rep Power: 0	that 4 rotor is sick seen it at 7stock! __________________ 2005 MAZDA RX8-THE WEEKEND WARRIOR 2008 MAZDA CX7-THE FAMILY RIDE 1994 MAZDA MIATA-THE CLASSIC(36K ORG MILES) 1992 MAZDA 929-THE VIP PROJECT 1989 MAZDA MX6-THE DAILY

12-14-2009, 11:07 PM	#4
Monster_FC3S 7 NOOB Join Date: Jul 2009 Location: Mountians of, NC Posts: 40 Rep Power: 0	BMIRacing's 4-rotor FTW! But still a hard1 Chadwick's is sick to (Would love to see one of them at the next deals gap meet!! woot woot) __________________ MØ₦$ŦEƦ_₣₡3$

12-22-2009, 08:25 PM	#11
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio Posts: 282 Rep Power: 18	that thing is music to my ears. it's sweeet! __________________ leaving my carbon footprint....one start up at a time

12-15-2009, 07:06 PM	#6
prrex4ever Rotary Fanatic Join Date: Oct 2008 Posts: 274 Rep Power: 18	Another tough decision. Luv the 4 rotor but.......!

12-21-2009, 04:08 PM	#10
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida Posts: 320 Rep Power: 18	DANG that 4-Rotor sounds sick !!

12-23-2009, 03:49 PM	#12
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Gotta love the 4 rotor!!! __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-28-2009, 10:01 AM	#13
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	Only a few more days left to get your vote in! It's a close race between the FD and the RX-8 __________________ Kevin

12-30-2009, 10:38 AM	#14
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 Posts: 302 Rep Power: 18	Is BMI a member on this forum? I know chadwick is so I voted for him.