Plain Jane OEM nothing to see here rebuild

[JustJeff]

Originally Posted by Pete_89T2

WRT the PCV hoses, the two hoses on the bottom of the PCV often turn to goo. That would be the large diameter one that goes to the oil filler nipple on the housing and smaller one routes back to the intake mani via the rats nest IIRC. Both see crankcase/oil vapors, so over time a cheaper grade rubber hose (regular vacuum hose) or a standard unlinered silicone hose will breakdown. Look for hose rated as an "emissions" hose to replace those; it's nitrile rubber IIRC, which is designed to be compatible with oil vapors.

The oil filter being too hot to handle is probably normal - depends on your threshold of pain. I've got an oil temp gauge on my FC, and if I touch the filter while the oil temp gauge is reading a normal 195F, I find the filter too hot to handle.

Excellent point on the hose issue...I never even considered that.

About the filter, I didn't have my oil temp gauge wired up at the time I first started the engine up. My concern was how much hotter and how quickly it got hot compared to the rest of the engine and coolant. What I guess was going on was that there was probably air being pushed through with the oil on initial start up.