Sometimes you just have to know when to start over...

[TitaniumTT]

Originally Posted by Nismo

I have never had an easy time, the car has 75k miles, so they could be the originals. Also when you put two disimilar metals together you are going to get corrosion like that, specially with heat cycling like you see on a brake rotor.

There's the real reason right there. The salt on the rd doesn't help and the salt air makes things that much worse too.

Originally Posted by Buggy

Just give that area a good wash with some brake clean. That will get rid of any brake fluid. Shouldn't hurt any of the exisiting paint either.

Brake clean is good for washing it but it absolutely WILL take paint off if let sit long enough.

Clean with brake clean
sand with a flat disc
reclean with brake clean
spray with rust converter
sand with flat disc again(this basically takes all the rust converter off except the converter in the pits)
prime
paint
touch yourself

[classicauto]

Originally Posted by titaniumtt

clean with brake clean
sand with a flat disc
reclean with brake clean
spray with rust converter
sand with flat disc again(this basically takes all the rust converter off except the converter in the pits)
prime
paint
touch yourself

do not miss that step.

[Nismo]

Originally Posted by classicauto

do not miss that step.

I actually could have used your advice on the paint... And you have to be a smart ass and say that!

Thanks Joe, Thanks a lot man lol.



I am only doing a temp fix for now, too hard with the engine in, it will be redone either by myself, of Classicauto when ever I find money to paint it.

[Buggy]

Originally Posted by Nismo

I actually could have used your advice on the paint... And you have to be a smart ass and say that!

Thanks Joe, Thanks a lot man lol.



I am only doing a temp fix for now, too hard with the engine in, it will be redone either by myself, of Classicauto when ever I find money to paint it.

Ha, I actually thought the same thing. I saw Joe posted and thought, hmm maybe he had something inteligent to say about this paint/rust situation. Nope, nothing. I will admit though, that was funny.