|
|||||||
| 3rd Gen RX-7 Engine Parts Only Engine Related parts ONLY! |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| 3rd Gen RX-7 Engine Parts Only Engine Related parts ONLY! |
|
|
|
Thread Tools | Display Modes |
|
|
08-25-2010, 11:56 AM
|
#1 |
|
The Professional
Join Date: Nov 2009
Location: Quartz Hill
Posts: 18
Rep Power: 0  |
Interested in the short block as well but need specs... porting? seals? and who built it etc...
|
|
|
|
08-26-2010, 12:39 AM
|
#2 |
|
The Newbie
Join Date: May 2010
Location: Elkhart, Indiana
Posts: 16
Rep Power: 0 |
Ok sorry for the delay in responses. The manifold is sold sorry... I still have the rad for sale. I will post pics tomorrow.
The engine was rebuilt by Banzai Racing a little over a year ago. It was street ported, has 88 TII lower compression rotors and matching wieghts. It is 2mm seals. Sorry there is no warranty as Banzai only gives a year warranty with their rebuilds. But there is only around 5k miles on it, as I never got the tune done and so it was only boosted during a base tune and a short retune session by Chris at Banzai. So it is ready to go and all broke in. It compression tested in the high 90's on each rotor face. Last edited by rx7man1993; 08-26-2010 at 12:43 AM. |
|
|
|
|
08-26-2010, 12:42 AM
|
#3 |
|
The Newbie
Join Date: May 2010
Location: Elkhart, Indiana
Posts: 16
Rep Power: 0 |
UPDATE:
PRICE DROPS!!! My paypal addy is: e_money@excite.com Prices are with shipping unless other wise said. Short block - $1700k app : 5k miles +SHIPPING The engine was rebuilt by Banzai Racing a little over a year ago. It was street ported, has 88 TII lower compression rotors and matching wieghts. It is 2mm seals. Sorry there is no warranty as Banzai only gives a year warranty with their rebuilds. But there is only around 5k miles on it, as I never got the tune done and so it was only boosted during a base tune and a short retune session by Chris at Banzai. So it is ready to go and all broke in. It compression tested in the high 90's on each rotor face. Greddy front strut mount bar - $80 Pending 5 Speed Transmission w/newer 5 gear sync - $375+SHIPPING Pending comes with short shifter. XTR 6 puck clutch - $200 lightweight flywheel - $100 Or $275 together E8 Haltech ECU with fling lead, WB 02 sensor and gauge - $1100 Or $800 for ECU $200 for sensor and gauge. $200 for Flying lead (wire harness) LT8 Microtech with new wiring harness - $775 LS1 coils,8mm plugs wires, 3 bar map - $125 Polished parts: Acces. bracket - $50 Water Pump - $75 Subframe - $75 + SHIPPING (polished everything) Rare Blitz FMIC with piping - $1200 + SHIPPING Greddy Type S BOV - $125 Koyo rad (polished) w/Hoses - $300 + SHIPPING Rx7Store.com midpipe resonator - $225 + SHIPPING HKS Ti CF can cat back - $300 + SHIPPING Hi-Flow midpipe - $175 + SHIPPING Driveshaft - $65 Solid Megan racing tie rod ends - $75 19" Stern (ADR) wheels and tires. P275/30ZR19 Kumho Escta SPT rears 5k miles on them P225/35ZR19 Conti Extreme DWS fronts 1k miles on them $800 + SHIPPING |
|
|
|
|
09-11-2010, 06:19 AM
|
#4 |
|
The Newbie
Join Date: May 2010
Location: Elkhart, Indiana
Posts: 16
Rep Power: 0 |
UPDATE: PLEASE CONTACT ME BEFORE MAKING ANY PAYMENTS!!!!!
PRICE DROPS!!! My paypal addy is: e_money@excite.com Prices are with shipping unless other wise said. Short block - $1600k app : 5k miles +SHIPPING The engine was rebuilt by Banzai Racing a little over a year ago. It was street ported, has 88 TII lower compression rotors and matching wieghts. It is 2mm seals. Sorry there is no warranty as Banzai only gives a year warranty with their rebuilds. But there is only around 5k miles on it, as I never got the tune done and so it was only boosted during a base tune and a short retune session by Chris at Banzai. So it is ready to go and all broke in. It compression tested in the high 90's on each rotor face. XTR 6 puck clutch - $200 lightweight flywheel - $100 Or $275 together E8 Haltech ECU with fling lead, WB 02 sensor and gauge - $1000 Or $700 for ECU $200 for sensor and gauge. $200 for Flying lead (wire harness) LT8 Microtech with new wiring harness - $775 LS1 coils,8mm plugs wires, 3 bar map - $100 Polished parts: Acces. bracket - $50 Water Pump - $75 Subframe - $75 + SHIPPING (polished everything) Rare Blitz FMIC with piping - $1100 + SHIPPING Greddy Type S BOV - $125 Koyo rad (polished) w/Hoses - $275 + SHIPPING Rx7Store.com midpipe resonator - $200 + SHIPPING HKS Ti CF can cat back - $275 + SHIPPING Hi-Flow midpipe - $150 + SHIPPING Driveshaft - $65 Solid Megan racing tie rod ends - $75 19" Stern (ADR) wheels and tires. P275/30ZR19 Kumho Escta SPT rears 5k miles on them P225/35ZR19 Conti Extreme DWS fronts 1k miles on them $800 + SHIPPING |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
