New project: 1976 Cosmo RX-5 - Page 5

***TitaniumTT*** · 02-07-2011, 09:16 PM

Good luck... germans don't get drunk... we get even

***TitaniumTT*** · 02-07-2011, 09:19 PM

Oh, and canucks shouldn't go down to mehico... they're generally whiter and then therefore pull in more coin on the mkt..... Joe should reconsider his vacation plans.

Buggy · 02-07-2011, 10:32 PM

^ I second this.

djmtsu · 02-08-2011, 07:51 AM

Lol, I'm Swedish so I'm staying out of it

Anyway, the Weber is here, the LIM should be here in a day or so. This weekend I am going to wire up the electronic dizzy and install the carb. Hopefully this thing will at least start this weekend.

Also, when I tore apart the engine I was a little concerned. I couldn't turn the main pulley, so I thought it might have seized. Poured some MMO into the plug holes, and let it sit for several days. Went out, put a ratchet on the main pulley bolt, and she turned right over. 3 good whooshes on all faces, so here's hoping it is good internally. At least that is a small victory.

Also, it might not have turned over the first time I tried because it might have been in gear. Maybe....

***TitaniumTT*** · 02-08-2011, 09:51 AM

:willynilly: :chug:

Nah, if it was in gear it would still move slightly.... unless the tranny or rear end is siezed

FerociousP · 02-08-2011, 10:39 AM

Quote:

Originally Posted by TitaniumTT

unless the tranny or rear end is siezed

thats what she said...

djmtsu · 02-08-2011, 12:49 PM

Zing!

What the fuck has my build thread turned into?

I don't know, but I like it.

***TitaniumTT*** · 02-08-2011, 01:09 PM

Quote:

Originally Posted by FerociousP

thats what she said...

Your tranny got siezed? That sucks... you filing a petition to get him/her back?

FIBREMAZ 13 BEEF · 02-09-2011, 09:46 AM

Nice find man!
If you happen to come across anyone that sells new rear brake discs/rotors could you please pm the info as they are unobtanium down here in Australia.

Thanks
BEEFY

djmtsu · 02-09-2011, 10:07 AM

Quote:

Originally Posted by FIBREMAZ 13 BEEF

Nice find man!
If you happen to come across anyone that sells new rear brake discs/rotors could you please pm the info as they are unobtanium down here in Australia.

Thanks
BEEFY

Sorry man, same deal here. I actually joined ausrotary just to see about finding parts and such, and it seems you guys are in the same boat we are.

For being a top selling car in Japan, they sure are hard to find spare parts for. That is why I am doing an FB rear axle swap.

PS- Get me a sweet ass dolphin tail muffler!!!! (seriously)

djmtsu · 02-09-2011, 02:23 PM

Small parts update:
-ordered rebuild kit and new soft mounts for the Weber
-ordered new gaskets
-new cap, rotor, wires, coils, plugs, filters
-RB LIM will be here tomorrow
-ordered a set of Pedders rear springs from Australia. ETA: 6-8 weeks. Hope they get here in time!

Buggy · 02-09-2011, 06:13 PM

Ya hopefully Pedders comes through in time for you. I know I had a bit of a delay getting my springs from them.

djmtsu · 02-09-2011, 08:44 PM

I'm hoping they come sooner than later. The girl said they were placing an order today, and that my springs were in stock in AUS. So, even though they give a 6-8 week lead time, she said they would more than likely be here in 4-5 weeks.

Fingers crossed!

djmtsu · 02-11-2011, 03:07 PM

LIM is here. Still waiting on the Weber rebuild kit and soft mounts. Jeff20B shipped me a dizzy yesterday.

My tranny is just fine.

joeywimsett · 03-07-2011, 09:33 PM

Hey,

I own a 76 mazda cosmo and have been searching for different rear end gears, anybody know where to find some?

02-07-2011, 09:16 PM	#61
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Good luck... germans don't get drunk... we get even __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-07-2011, 09:19 PM	#62
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Oh, and canucks shouldn't go down to mehico... they're generally whiter and then therefore pull in more coin on the mkt..... Joe should reconsider his vacation plans. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-07-2011, 10:32 PM	#63
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada Posts: 260 Rep Power: 16	^ I second this. __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

02-08-2011, 07:51 AM	#64
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Lol, I'm Swedish so I'm staying out of it Anyway, the Weber is here, the LIM should be here in a day or so. This weekend I am going to wire up the electronic dizzy and install the carb. Hopefully this thing will at least start this weekend. Also, when I tore apart the engine I was a little concerned. I couldn't turn the main pulley, so I thought it might have seized. Poured some MMO into the plug holes, and let it sit for several days. Went out, put a ratchet on the main pulley bolt, and she turned right over. 3 good whooshes on all faces, so here's hoping it is good internally. At least that is a small victory. Also, it might not have turned over the first time I tried because it might have been in gear. Maybe.... __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-08-2011, 09:51 AM	#65
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	:willynilly: :chug: Nah, if it was in gear it would still move slightly.... unless the tranny or rear end is siezed __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-08-2011, 12:49 PM	#67
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Zing! What the fuck has my build thread turned into? I don't know, but I like it. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-09-2011, 09:46 AM	#69
FIBREMAZ 13 BEEF Mazda Carbon FIbre Master Join Date: Sep 2008 Location: Adelaide, Australia Posts: 64 Rep Power: 17	Nice find man! If you happen to come across anyone that sells new rear brake discs/rotors could you please pm the info as they are unobtanium down here in Australia. Thanks BEEFY

02-09-2011, 02:23 PM	#71
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Small parts update: -ordered rebuild kit and new soft mounts for the Weber -ordered new gaskets -new cap, rotor, wires, coils, plugs, filters -RB LIM will be here tomorrow -ordered a set of Pedders rear springs from Australia. ETA: 6-8 weeks. Hope they get here in time! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-09-2011, 06:13 PM	#72
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada Posts: 260 Rep Power: 16	Ya hopefully Pedders comes through in time for you. I know I had a bit of a delay getting my springs from them. __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

02-09-2011, 08:44 PM	#73
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	I'm hoping they come sooner than later. The girl said they were placing an order today, and that my springs were in stock in AUS. So, even though they give a 6-8 week lead time, she said they would more than likely be here in 4-5 weeks. Fingers crossed! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-11-2011, 03:07 PM	#74
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	LIM is here. Still waiting on the Weber rebuild kit and soft mounts. Jeff20B shipped me a dizzy yesterday. My tranny is just fine. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-07-2011, 09:33 PM	#75
joeywimsett The Newbie Join Date: Mar 2011 Posts: 1 Rep Power: 0	Rear end gears Hey, I own a 76 mazda cosmo and have been searching for different rear end gears, anybody know where to find some?